Search results

Ok, right, this is a good point!

Hello team, I used and liked my front seats with memory function in previous car (Audi A6 C7). I reasently bought/changed to A6 C8 MY2020 and this one is equipped with memory function for driver seat and front passenger seat only with power adjustment (no memory). I’m considering to add the...

Hello, I'm mingling with the wet arm wind screen wipers retrofit over here and those adaptation values looks familiar (according to the description of functions of wet arm wipers, ref. SSP-670).

Do we have any light to this issue I have on my hands? I drive now so that the J915 is controlling the wet arm wipers and washing happens during upward swing plus rerouted the heating cables from bonnet to wet arms and the rear camera washing is disconnected (I'll do it by hand).

So I have to find a replacement for existing dataset; J519 is now controlling one water pump (V5) with two water outlets, one for wind screen spooling and the other for back camera cleaning which is operated via service menu in MMI, in addition J519 controls the heating of the spay nozzles in...

Hello team. I'm middle of retrofitting wet arm wipers to my vehicle A6 my2020 and wonder what coding or adaptations need to be done to activate those wipers and washer pump. Installed sofar the J1100 (connected supply, ground & LIN-bus and outputs for washer pump (dual) et nozzle heaters and...

And here's the latest auto scan: Monday,15,July,2024,13:48:46:09650 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 24.5.0.0 (x64) HEX-V2 CB: 0.4643.4 Data version: 20240429 DS355.0 www.Ross-Tech.com VIN: WAUZZZF24LN071524 License Plate: YKL-905 Mileage...

Thank you your advice. Actually this is solved today; mechanical installation is similar to yours and is indeed a bit tedious, wiring need to be added and connectors are hard to find in ordinary el-store but I managed, coding succeeded today and was most simple: module 42 (J386) and 52 (J387)...

Any ideas for this one, somebody?

Hello, I wonder how to code the door control modules to accept retrofitted auto dimming side mirrors. There is in controller/code byte 9 with option 'tricker from BMC or FLA', which one to use? Do I need to touch any other module/s to make mirrors work correctly? I have at the moment factory...

Hi, good pictures from you. I wonder is it possible to you to make a 'shopping list' with part# of the components needed to change the wheel from non heated to heated one? Is it so that only chanel 10 value need to be changed to 40 with VCDS to make the heated wheel functioning?