Search results

Well thats weird....... I de-seleted one module 17 in the CAN gateway and got a module 17 not registered error when I did a freash scan. I then reversed the module selections, cleared all the errors and did a freash scan. The error "17-Instruments -- Status: Cannot be reached" has...

Thursday,10,Octobber,2024,12:18:31:15913 VCDS -- Windows Based VAG/VAS Emulator Running on Windows XP x86 VCDS Version: 24.7.0.0 Data version: 20240715 DS356.3 www.Ross-Tech.com VIN: WAUZZZ4G0HN024478 License Plate: Chassis Type: 4G-AU57 (4G8) Scan: 01 02 03 05 08 09 15 16 17 19 20 28 34...

Hi, I recent purchased a 2016 A6 Allroad and it has an error in the list of installed modules when I perform a scan (see below). When I look at the installation list inteh CAN gateway, module 17 appears twice and both instanses are ticked. I therefore have three questions: 1) why is module...

Brilliant - thank you. 5F Byte 19 - which bit relates to RVC low/high - so I can check it is not set?

You'll see from my scan above that I'm running the latest s/w VCDS Version: 24.7.0.0.

Thanks for the response, I'll check IDE05040-MAS04390 this morning and report back. If the data can't be used by my interface could you provide a readable version that I can use to determine what may be stopping my camera from displaying an image when I go into reverse. I haven't upgraded my...

Hi, When I open the long code helper in module 5F, I get a popup saying to contact support for additional information. I'm have issues installing a Reverse Camera (highline). Do you have any information on coding 5F, ideally the whole module but particularly Byte02, 16 and 19...

Which module did you change byte02, bit02 in?

Thank you When I attempted to change the adaptations this morning I didnt get the workshop error mesage and the change was accepted.

Hi I have an HEX-USB+CAN iterface and running the latest VCDS (23.11.0). My car is an Audi A6 C7 Allroad 2016 When I go to make changes to the adaptations in module 5F, I do not get a list of channel numbers. Instead I get the full list of adaptations as per an adaptation map. Am I missing a...

Hi, I want to make an adaption map of module 08 before swapping it. Does anyone have the security access code? (I've already tried 20103 and 61378) Chassis Type: 8T-AU48 (8T0) Scan: 01 03 05 06 08 09 10 15 16 17 19 36 3C 42 46 47 52 53 55 56 77...

My A5 has just had a second hand CAN gateway fitted, with an extended CAN, during which my battery was disconnected and all my VAGCOM changes were reverted back to factory settings. I've recoded all the modules and everything works, except for some of the keyfob functionality: 1) the...