Search results

I was looking also to have the auto mirrors folding when locking the car. Can this be done on this car?

Yes, I am. Thank you

Thank you for taking the time to reply.

Hello, would you please let me know how I can disable start/stop on Audi Q5 2018 2.0TDI. Thank you Saturday,12,October,2024,13:25:44:10062 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 24.7.1.0 (x64) HEX-NET CB: 0.4643.4 Data version: 20240919 DS356.3...

Hi, thank you! The same engine indeed BXE. So, a replacement with similar injectors and should work.

I think I need to replace the injectors soon. I was reading the codes from new injectors must be saved to ECU when replacing. Would this be possible on this ECU? When to Adaptation under Engine then channel 71 for cylinder 1. Instead of showing the code of injector 1 was showing error - not...

Thank you for reply. Yes, although the Access Security accepts 12233, under Adaptation there us nothing related to EGR. Like you mentioned this is not something it can be done to this engine.

I must apologize, was looking in Basic setting instead of Measuring Blocks. Do you know if I can adjust the EGR flow so to let less gases in intake. Apparently the Coding II-11 doesnt have 12233 as login code. Thank you!

Yes, I was checking that in Engine but 013 Group says that is not available.

Hello, I would need to check the reading for injector quantity. I was trying the 013 Group but seems not be available in my case. Could it be somewhere else for MK60? Thank you

After replacing the ABS sensor and solving the electrical problem at parking sensors the error for steering angle disappeared after taking the wheel full right and full left. No more errors now. Thank you all!

Not very hard. Initially was very light but after performing the procedure for 00778 it become harder. Will repair the wheel speed sensor then will try again. Can the wheel speed sensor be tested by moving the wheel while having the car in the air, and VCDS being able to read the small amount...

Also, after performing the procedure for 00778 I am feeling the steering wheel harder to turn. It means that is not electrically assisted anymore.

Yes, I did that also immediately after 00778. I have some doubt though about plus/minus 10° because the first field from Group 004 seems not to move, it remains always at 0°. Of course this is ideal but it should also move when moving the steering wheel. I am thinking also that if error 02546...

Hello! I did the procedure for basic settings on G85. Apparently the error disappeared for G85 but for it didn't work 02546 - Steering Limit Stop. Maybe is because I didn't work yet on solving the wheel speed sensor issue. What worries me is that on Group 004 the value from first field isn't...

Thank you all for suggestions and help. I will perform the basic settings for MK60 first as mentioned by Ross-Tech documentation and let you know. The ABS sensor problem is on the rear left wheel. Have to check the electric plug. The wheel bearing is new, only I put back the old sensor. Maybe...

Hello! I am getting this error after doing some repairs and leaving the car without battery for some long time. On this car this is MK60. Would you please let me know how it needs to be treated. Thank you! Here is my scan: Thursday,07,October,2021,18:17:52:10062 VCDS -- Windows Based VAG/VAS...

Thank you!

Hello! I would like to disable the speed limit beep. It makes this beep when it's getting to 120km/h. Thank you

Hello, I wish to code the start/stop button so the engine doesn't stop each time I need to stop the car. Like many others I think is not an useful function. I've tried to apply the procedure: Module 09 > Security Access > code 20113 > Adaptions > Read channel 34 then You have these options...