Search results

18097 CODE WOULD IT NOT CAUSE THE TRANSMISSION PROBLEM?

2006 vw jetta tdi bew automatic dsg. camshaft sensor was bad replaced but still have codes for it. all wiring seems good from testing. the main issue is the transmission is flying into neutral when you accelerate. the 18097 code i know could be a ton of things. when this happens you can cut the...

the TSB has already been done. the ecu has been updated and coding is correct. fuel pressure, volume, etc. all meet specs. i dont know where to go next. i did find a ambient sensor in the cowl that has been chewed on and has a open. i am fixing it right now but i dont think it would effect starting.

it always starts but long crank time especially hot

Tuesday,12,November,2024,11:40:28:00549 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 24.7.1.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240919 DS356.3 www.Ross-Tech.com VIN: 9BWGR61J044021479 License Plate: Mileage: 329190km-204549mi Repair Order...

Tuesday,12,November,2024,11:36:02:00549 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 24.7.1.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240919 DS356.3 www.Ross-Tech.com VIN: 9BWGR61J044021479 License Plate: Mileage: 329190km-204549mi Repair Order...

can i post a log here .. my injector quantity is off and i cant seem to change it. i have one injector that is suspect you will see it in the log

NEED HELP CODING NEW ABS CONTROL MODULE . SECURITY LOGIN CODE? BASIC SETTING? WHAT ARE THE STEPS

Thursday,31,October,2024,10:52:38:00549 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 24.7.1.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240919 DS356.3 www.Ross-Tech.com VIN: WVWUK63B83P103948 License Plate: Mileage: 147180km-91453mi Repair Order...

We removed the transmission and replaced the dsg clutch unit with new one. Removed the valve body and ohm all solenoids. Cleaned and put back together.now it has the same symptoms/promblems. No reverse, will not shift out of first, prndl light flashing, it will not do the basic setting. Using...