Search results

  1. B

    P2147 - Supply Voltage for Fuel Injector Group A - Short to Ground

    Further update! Decided to bite the bullet and order new injectors after being unable to reliably recreate the fault or find anything wrong wiring wise. 4 new injectors and van is running perfect now, tried to put stress on it during the road test (previously what caused the short) and kept on...
  2. B

    P2147 - Supply Voltage for Fuel Injector Group A - Short to Ground

    So, few weeks later and an update; I have swapped out for 4 "recon" injectors, I know this in itself is a gamble so I accept I may need to just give up this crusade and bite the bullet for new. However, it would be really useful to try and narrow in (if I can) on which Injector is failing me...
  3. B

    P2147 - Supply Voltage for Fuel Injector Group A - Short to Ground

    Sorry, I forgot to add that, I have tested for breaks in the wiring and not able to find anything, cant get the multi-meter to beep over any of the injector loom / connectors. I appreciate all signs point to #3 but just if there is a way to 100% confirm this with my intermittent issue. The old...
  4. B

    P2147 - Supply Voltage for Fuel Injector Group A - Short to Ground

    Morning all! Having the above error somewhat randomly after fitting a replacement injector to cylinder #3. The injector I used is sold as "recon" and as a result comes with a set of risks, I just want to try and narrow down if this "new" injector is at fault to speak to the seller to see what...
  5. B

    Resolved ABS Unit Swap

    Did another scan after the basic settings / calibrations and happy to report things look good; As Boki Ar said, my tripping up point was not doing these settings immediately after coding. Bit fiddly to do the pressure calibration but thanks Uwe for the steer to the proper guide. Thanks for...
  6. B

    Resolved ABS Unit Swap

    Thanks all, I think that's where I was going wrong, not going into the basic settings right away. I need to do the calibrate when its cold so will do that tomorrow, appreciate the pointers. Jef, you are 100%, I did see this myself however the unit itself came from a Seat Leon which isnt 4X4...
  7. B

    Resolved ABS Unit Swap

    Afternoon! I prefix this with I know its not recommended to swap out part numbers for those that dont match however I was able to pickup a unit that is very close to my original. I referenced THIS thread and its within the same "range" Original scan; Saturday,01,June,2024,12:58:01:47896 VCDS...
  8. B

    VW Caddy MK3 and MFSW from Golf Mk5

    Not sure whats suddenly made it behave but after a short drive the airbag error has cleared, seems to be working now as expected!
  9. B

    VW Caddy MK3 and MFSW from Golf Mk5

    Managed to pop on a Mk6 Steering wheel and got the left side controls and horn working however I now have an airbag fault. The wheel is from a breaker so I suppose its possible the airbag is bad? Friday,17,May,2024,11:49:18:47896 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64...
  10. B

    VW Caddy MK3 and MFSW from Golf Mk5

    I believe so, not tested it on the road yet, will do that today. I followed the video below;
  11. B

    VW Caddy MK3 and MFSW from Golf Mk5

    Thank you, suspected this but appreciate the help. Ill get one ordered!
  12. B

    VW Caddy MK3 and MFSW from Golf Mk5

    Good morning! Very new to VCDS and coding however not unfamiliar with the process involved, suspect my failings are interoperability of bits and sadly a cross check on the Wiki still has me stuck; I am trying to add Cruise Control to my MK3 VW Caddy with Indicator Stalk along with a MFSW from...
Back
Top