Search results

I have temp warning alarms and instrument light on since removing the Automatic Transmission. Cant help thinking the ECU cant see the Transmission Oil Temp sensor in the circuit which is triggering the alarm. An auto electrician has checked the Cooling system and all is within spec. Really want...

Hi Uwe, I followed your suggestions. First checking the "Bypass DoIP" in the options tab, saving, exiting VCDS, running test (ok) Auto scan (ok). Today I pulled the immobiliser and bridged the W & K lines, still no joy. I can open Modules/Channels 15: Air bags 17: Instruments 19: Can Gateway 25...

Will give this a go and update. Many Thanks.

Monday,15,July,2024,15:31:50:04211 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64(Parallels) VCDS Version 24.5.0.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240429 DS355.0 www.Ross-Tech.com VIN: WV1ZZZ70Z3H123208 License Plate: Chassis Type: 70 (7D - VW...

Your speedo difference may also be down to tyre/wheel size.

I've done the auto to manual conversion as well. I am waiting on Ross-tech to advise me as I can't access the Engine module or the Auto Trans module to change the coding. I have the professional version of VCDS with the Hex-net adaptor. When I was coding the Instrument cluster today I noticed...

Did you ever get this sorted @davidlyneham?

When using my Hex-net via usb cable it will auto-scan perfect. But when I try to connect to individual module's to program them, it will only connect to 2 out of the entire list. All others throw an error. No Communication with Controller. I have tried restarting the VCDS software, restarting...

If I cant get the parts I have on hand to work I will try this suggestion. Many thanks.

The engine ECU is programmed to the Instrument cluster. So the engine will only start whilst connected to the instruments that came with the donor vehicle. I took everything from the donor vehicle, except for the damaged automatic transmission. So the ECU is now saying there is no communication...

Is this something I can do using VCDS? I understand the Engine ECU, Instrument Cluster, Immobiliser, and Ignition Key transmitter all need to work together to get the van running. Crossed that hurdle. I read somewhere on a UK FB page I could use VCDS to do an instrument swap and was referred to...

Correct. Small box behind the centre air vents.

Thank You Bruce. Still getting familiar with VCDS and Windows, having been a Mac guy for the past 20yrs. I have followed the instructions as best I could.

So, can I code out the transmission module as it no longer exists? Can I refit my original instrument cluster, and program the mileage as shown on the engines original instrument cluster? My original Instrument cluster and engine did not have an ECU fitted. It was a purely mechanically tuned...

My VW T4 is a 2001 SWB Australian Delivered manual. please find attached the latest auto scan. Saturday,01,June,2024,16:40:20:04211 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64(Parallels) VCDS Version 24.5.0.0 (x64) HEX-NET2 CB: 0.4643.5 Data version: 20240429 DS355.0...

My 2.4D AAB manual T4 died a slow death. I was able to find a cheap 2.5tdi ACV complete donor van but it was automatic. The automatic gear box had a catastrophic failure. I was able to retrofit the 2.5tdi and marry it to my manual gearbox but to get it to start and run I had to use the...

Thanks Uwe, I have since registered my Hex-net device. I am still having challenges accessing the VCDS Mobile Cloud functions. When I try to connect through the only module I can access (Instruments-17) I get a timed out error. When I do an advanced test and ping the server, all I get is the...

Admin please. Could I please recover my VCDS Cloud Server User name? Cannot log in or change password.