Search results

GOOD NEWS EVERYONE! (although I'm sure this isn't exactly new information) Thanks to the contribution of two comments left by Vasia on the google sheet, we now know that Bytes 1 and 3 are the 7th and 8th digits of the VIN respectively.

All those transmission codes makes me think it has a DSG tune. How does the wiring at the pump look? Are all the fluids at the correct levels?

COMPLETE SHOT IN THE DARK, but you could give this code string a try 01FA8AA12420096F0379060041CA2980512490C0608294F300400032C009 No guarantees it will work, however, and you should really have the dealer/Independent with ODIS/FAZIT run SVM to get the official coding

Thursday,17,September,2020,17:40:06:58782 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 20.4.2.0 (x64) HEX-NET CB: 0.4513.4 Data version: 20200730 DS317.0 www.Ross-Tech.com Dealer/Shop Name: Somnus Workshop Code: 444 40543 000000 VIN: WAUKJAFM9DA License...

I just saw that this is a sticky now, and all I can say is you guys took a hunch I had (and a hunch others shared as well) and turned it into a whole new way to look at MQB light configuration. The collective knowledge in this forum is staggering.

------------------------------------------ Model | Audi S4 qu. 3.0 ------------------------------------------ Date of production | 08.08.2011 ------------------------------------------ Model year | 2012 ------------------------------------------ Sales type | 8K254Y...

So after some digging I am coming up empty on what is causing the Missing Message fault that is getting stored in the A5 Module Address A5: Frt Sens. Drv. Assist (R242) Labels:| 3Q0-980-65X-A5.clb Part No SW: 3Q0 980 654 G HW: 3Q0 980 654 Component: MQB_B_MFK H06 0231...

Don, That's how I stumble onto most of my solutions; By breaking my car to the point it is undrivable, learning how to fix it, and sharing that information here :D

As an example, I modified the Lighting Configuration channel to change my GTI's Left U-light (Leuchte4TFL) to act as a turn signal Starting with the unmodified Lighting Configuration string IDE05145-Light configuration,21 34 00 14 02 00 7F 00 00 00 00 00 00 00 00 00 21 3E 00 15 04 00 7F 00 00...

I can confirm that any changs that I made to the Light Configuration channel including: Dimming Value Light Function Light Type are reflected in the Leuchte channels after an ignition cycle and the same is true in reverse (changes made to the Leuchte channel reflect into the Light...

That is what it seems, at least on my vehicle specifically. I believe more testing would be required for a definitive answer. It looks like a step in the right direction, however. Although, some of the changes I made had a tendency to set a "Control Module Incorrectly Coded" DTC, but reverting...

Uwe, apologies, that was a little scatterbrained on my part would you add this quote to the first post? or should it remain where it is.

TBAx, You are correct on changing a byte in the light config does cause an immediate change to the Leuchte channel it is assigned to. As a test, I changed the Light Function A byte for the left fog light from 12 to 18 and, after checking the related Light Function A channel it now displays...

Don, I believe you are most likely correct in your assumption that they were trying to optimize the BCM. What makes that more evident is the fact that in the MK7.5 vehicles, most of the headlight control is handed off to the 4B: Multifunction Module and the related leuchte channels are...

Don, Your primer is actually what made me interested in how the configuration was handled in the newer BCMs. It looks loke there are actually THREE configuration channels in the BCM IDE05145-Light configuration ENG141661-Leuchtenkonfiguration_Aussenlich_Heck...

NOTE: Once again, take this with a grain of salt, this information is for educational purposes only and most likely only useful to people much smarter than myself So I was curious how the "Light Configuration" that exists as a single Channel on the newer BCMs and consists of a really big...

Has anyone run into the issue of a certain dealer scan-tool *ahem* not able to calibrate a retrofitted A5 camera on a MK7? more specifically, said scan tool gets past measuring the wheel arches and throws an error: The Calibration could not be started successfully. The Reason is: Procedure...

OK, so I cant find anything related to these errors, specifically the EPB error (NAR GTIs don't have EPB) so i'm stumped. Any advice? Tuesday,12,February,2019,12:40:24:58782 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 18.9.1.0 (x64) HEX-NET CB: 0.4451.4 Data...

NOTE: USE AT YOUR OWN RISK! NONE OF THIS INFORMATION HAS BEEN VALIDATED I wanted to post this info to see if anyone else could add to it. This is the information I have found regarding the MK100 ABS controller sourced from (Mostly GTI) Auto-scans I have had access to as well as from other...

Auto-Scan: Thursday,24,January,2019,21:13:40:58782 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 18.9.1.0 (x64) HEX-NET CB: 0.4451.4 Data version: 20190114 DS296.0 www.Ross-Tech.com VIN: 3VV4B7AX7JM------ License Plate: Mileage: 12859km-7990mi Repair...