Search results

The blockmap-01-8W0-906-259-AK for MY23 A5 is missing so many values compared to blockmap-01-8W0-906-259-T for MY21 A4. MY21 Address 01: Engine (J623-DPAA) Labels:. 06L-907-115-V1.clb Part No SW: 8W0 906 259 T HW: 06L 907 425 E MY23 Address 01: Engine (J623-DPAA) Labels: None...

I'll have to leave it to you guys to see what the car is saying to the software and if there's something not processing correctly. That 19-gateway would claim slaves that aren't wired to it would seem very odd. I haven't noted any other LIN slaves listing where not expected. I ran into this...

Hello, Reference this MY23 Q5 scan, https://forums.ross-tech.com/index.php?threads/39220/ , and this MY23 A4 scan, https://forums.ross-tech.com/index.php?threads/42013/ , why are the J453 and J1158 getting listed under the J533 (19-gateway) instead of the J527 (16-steering wheel), their actual...

Is there a way to do searches for strings that include spaces? The control module part numbers are spaced in the autoscan logs, which I support. But it makes it impossible to search the known good scans forum for scans with a particular part number. I'm trying to find scans with 4G0 035 182...

B8.0 use a separate control module at 55 for headlamp movement (J431 for autolevel, J745 for autolevel+swivel). B8.5 reduced costs by integrating a number of things into the J519 BCM (09-central electrics), including the management of the headlamp movements. So B8.0, you work with 55-headlight...

This is why VIN should be included, omit the last six if you care, the rest is vehicle configuration specific and not individually specific. The OP called it a 2009, but something seemed fishy about the trans info. The VIN proves it to be a 2010. UK posters seem to often get this wrong...

Well, if you guys could toss that on the list for consideration, that would be cool. Logging with sequential sampling just results in very coarse data resolution. As for the UI side of things, again, part of the issue is my screen. Not only is the resolution low, but the size is small. Thus...

The history data is a different function as I understand it. That's discussed on pages 4-6 of the referenced TSB. I've logged the history data and parsed that before. History data appears to pull 16 data sources, but I'm presuming none of those are the measuring block 110 data. Or why would...

Hello, Referencing pages 7 and 8 of Audi document "27 14 24 2025360/3 April 29, 2014 - 27 Low battery charge: Diagnosis tips and TAC instructions", which I found in a google search as NHTSA document MC-10122336-9999.pdf, it appears there is a Keep-Awake Manager which logs relevant data, if...

Hello. I was performing a test in Basic Settings on my CAEB engine (EA888 Gen2, UDS controller). I clicked the Show Measuring Values button so I could see/log the camshaft adjustment values as the test proceeded. The window that popped up was the same as if I had clicked Adv Meas Values from...

Hello, I'm using a HEX-NET 0.4436.4 with VCDS 18.9.1. The car is a 2009 A4 B8 (aka 8K) with 2.0T CAEB motor. So UDS protocol for the engine. With my HEX-CAN+USB, I could do Group UDS, but was limited to 8 values. Without grouping, I could do 12, but the values for a single cycle were too...