Search results

Thanks.!

Hi all. Is there a way to disable these front additional LED bars in a facelift Arteon 2021? These bars are used as position light's, they are not used as DRL's. They are connected to the front lights directly and operated via the lights modules - in these modules there is nothing to...

Hi. Today I was retrofitting the new RVC to the Superb III. It was nothing new to me, because I did it second time, however the camera itself is brand new and has the following errors. I tried to fix this using some tools I have, but without success. Could I ask for advice how to solve this...

Hi. I will do a SWAP my front brake set from 312 to 340 in my MY2016 Skoda Superb 2.0 TSI 220 hp. What do You think, do I need to recode something in my ABS unit? Lot of people say no, but it's always something what I don't sure. My current coding is as follow...

This is a scan from shine new Superb Sportline. Saturday,01,October,2016,12:03:55:24735 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 16.8.2.3 (x64) Data version: 20160926 DS261.0 www.Ross-Tech.com VIN: TMBCE9NP0H7030434 License Plate: KN9554 Mileage...

This an Autoscan from 2016 Passat: Saturday,04,June,2016,16:47:51:24735 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 15.7.4.1 (x64) Data version: 20160216 www.Ross-Tech.com VIN: WVWZZZ3CZGE2XXXXX License Plate: WHITY Mileage: 5473km-3400mi Repair Order...

This is scan of my brand new Superb picked up today. In case of need to scan anything else - just let me know :) Monday,09,May,2016,21:15:34:24735 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64 VCDS Version: 15.7.4.1 (x64) Data version: 20160216 www.Ross-Tech.com VIN...

Being watching a video of a BMW AutoHex softwae I can see, on the main screen there is visible the battery voltage - all the time. What I would suggest is to add this feature into VCDS if possible - it couldbe "nice to have" add on. Many times I can hear that somebody drain the battery during...

Hi everyone. Last time my neighbour ask me if it is possible to retrofit the OEM Power tailgate set for Octavia 3 MQB Estate. I just made 4 times that kind of retrofits in Skoda Superb Estate, and as I can see the wiring diagrams looks almost the same in MQB platform. The difference is that...

Saturday,10,October,2015,13:39:31:24735 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 15.7.1.0 (x64) Data version: 20150904 www.Ross-Tech.com VIN: TMBAJ9NP1F700XXXX License Plate: WHITYS3...

Hello everyone. I'm in the way to retrofit easy open in my Superb Combi. The reqiured hardware I obtained from Sharan 2011. It is new Kessy with "VIP" function, aerials and the aerials module. The parts photos You can find in this German forum in the following topic...

Hi! I've recently purchased MY2015 Skoda Octavia VRS without Hill Hold function. I searched across internet the possibility to enable this function, but no success. So, maybe here I will find the answer on my above question. Below the scan of my brand new shiny car :)...

Recently i got retrofit CEMC in Skoda Octavia MY 2011, greenline with newest CECM (1K0 937 087 AN). The request was to retrofit the fog lights and DRL's. Due to 085 CECM series doesn't support this I installed 087 AN. CECM is brand new, I've used oem coding from 085 and modifying with DRLs anf...

Uwe, are You going to increase the functionality of VCDS by including the direct coding in the memory cells in the CECM. I'm thinking about manual light configuration in cells 3073 - 3119 of the CECM. I think You know what I mean. I'm using other software to do it, but it's slowness is horrible...

Hello. Recently I observed, that my Ross-Tech uCan interface can't work, reporting this error message: I tried it on two different laptop's with Windows 7 32bit (where it works fine long time before). When connected to the USB port, the LED on the interface blinks once, and then Windows...