Search results

  1. D

    Golf 7 Retrofit Golf R-Line headlights

    I love you man. This worked like a charm. Entered the HEX 16 right the line og code, and it was accepted by the ECU. Now my high beam works again. Thanx alot. after many hours of trying and failure, this was the easiest fix. Thanx for all the good help her :-)
  2. D

    Golf 7 Retrofit Golf R-Line headlights

    Hi. Thanx for the tips. But non of this works. My BCM will not accept Byte 2 = 16. Got 3 choises on Bits 0-2. Its 00,02 and 03 Isnt my new headlights highbeam Bi-xenon? So its controlled by the hig beam shutter?
  3. D

    Golf 7 Retrofit Golf R-Line headlights

    He got working high beam. So i cat figure out whats the differense in adaptions values.
  4. D

    Golf 7 Retrofit Golf R-Line headlights

    DLA works fine whit this setup. I moved over all the ecu from my original headlights + the one extra LED ecu.
  5. D

    Golf 7 Retrofit Golf R-Line headlights

    Thanx for yor reply. I only changed the headlights. The only differens to my old hesdlight is thet the 5G1941043E has on mor LED driver ecu whit partnumber 4G0907697F. I had to alter the adaption valu on the turnlight to make the work properly. So now everthing is working but not the hugh beam.
  6. D

    Golf 7 Retrofit Golf R-Line headlights

    Yes, i would like that 😀
  7. D

    Golf 7 Retrofit Golf R-Line headlights

    Yes, i can understand that. But like i said, i dont have access to wiring diagram, so if anyone know and can share...
  8. D

    Golf 7 Retrofit Golf R-Line headlights

    Yea, this thread i have read and tested out. I don’t have these options in my ecu. What I don’t understand is that my bi-xenon light functions before the retrofit. Isn’t my new retrofit headlight bi-xenon as well?
  9. D

    Golf 7 Retrofit Golf R-Line headlights

    I will have a look. Thanx
  10. D

    Golf 7 Retrofit Golf R-Line headlights

    Hello At first my English is not that good, so bear with me. My front headlight on my 2013 Golf 7 was hit by a large rock while driving. It left a big hole in it, so it need replacement. Got my hand on two headlights from a Golf R-line. Almost similar headlights, but these headlights had one...
  11. D

    VW T5 2010 mod Engine CAAC, DPF light on, no DTC

    Hello. This T5 came inn whit cloged DPF. Used VCDS and regenerated the DPF. Deleted DTC and all is fine. But the DPF light is on permanently and there is no DTC. Replaced the G450 an adapted it whit VCDS. No change. I have used the car for many km now, but noe help. MVB on soot is fine. Any...
  12. D

    VW T5 2010 mod Engine CAAC in limp mode

    Hello I got a 2010 T5 Whit a CAAC enging. Every now and then it goes into limp mode and the glowing light is flashing. VCDS autoscan says P0087 fuel preassure to low. Ive been struggeling whit this problem a while. Last week i meassured return flow on injectors. The walues where to high and i...
  13. D

    DSG MVB interpretation

    Hello. Thank you in advance for response. I am completely new to this forum and probably need a little education , but I have a long experience with troubleshooting VAG cars ;-) Is there any how to`s for reading and interpretation of MVB of 6- and 7 speed DSG ? I'm thinking for example of...
  14. D

    passat 03C ABS

    I have changed the parking brake control unit. After I changed the parking brake control unit , the coding of ABS disapered. I want the correct code to enter in ABS and parking brake Wednesday,20,April,2016,18:43:14:44240 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS...
Top