Search results

  1. V

    New Polo cruise control/speed limiter change.

    Have done a lot already
  2. V

    Audi A3 8V 2016 Pfl to facelift highline camera coding

    True. I did not seen this sorry indeed need to be manual
  3. V

    Audi A3 8V 2016 Pfl to facelift highline camera coding

    try and report then everybody here knows also
  4. V

    Audi A3 8V 2016 Pfl to facelift highline camera coding

    Try this: - Park steer assist put coding back to original. So make back up camera coding off. - In 5F turn off byte 19 bit 1. Make this codings: VPS to activated VPS bus to Terminal 15 ENG122227-ENG117496-Car_Function_Adaptations_Gen2-menu_display_pdc,aktiviert ,60...
  5. V

    Polo 6R Steering Assist not reachable

    Hello iichel, i can confirm that it has to do with VCDS. Have now got maybe 5-6 cars display same. No coding available. So i think but since update.
  6. V

    Audi A3 8V 2016 Pfl to facelift highline camera coding

    Guys. This problem is related to the car. From factory 4K pdc and camera dont work. Need proper coding. That is problem! when you have camera work optical parking will no display. Only camera and beeping
  7. V

    Audi a3 pfl to fl rear led rear lights

    if feed is permanent will be no problem check again
  8. V

    Golf MK6 GTI error codes after retrofitting OEM Bi-Xenon LED headlights + LED taillights

    has to do with SW of the BCM, must be at least 0575 for LED to work. you have 0541, will never work
  9. V

    Caddy 2011 Xenon coding

    I can provide coding but high beams won't work. For high beams need connect full AFS. High beams work by Canbus. byte 11 bit 1 -> 0 byte 14 bit 4 -> 1 byte 17 bit 2 -.> 1 byte 18 -> 74 byte 19 -> 08 byte 21 bit 1 -> 0 byte 24 -> E4 byte 29 -> bit 3 This should do the trick
  10. V

    Audi a3 pfl to fl rear led rear lights

    where did you connect the supply for the turn signals?
  11. V

    Polo 6R Steering Assist not reachable

    Ok lets say it doesnt has G85 ok leave that a side. Then I dont understand why the 0x44 can not be reached and still saying no comm with G85. So that confuses me a bit i have tried 3 different pumps all same. I can not imagine that 3 are broken.
  12. V

    Polo 6R Steering Assist not reachable

    I don't understand where the G85 is located as it is not by canbus behind steering wheel. I have tried coding 0x04 but then gateway gives fault no communication and in gateway list says also not reachable
  13. V

    Polo 6R Steering Assist not reachable

    I will look at this. Thanks. I will post when i have something. strange thing is never is something changed.
  14. V

    Polo 6R Steering Assist not reachable

    what i see now is that gateway does not show 04 Steering Angle. I will try look at that tomorrow. But how is this steering angle connected?
  15. V

    Polo 6R Steering Assist not reachable

    I will look for this. But do you mean terminal 15 wire from bcm or from 44?
  16. V

    Polo 6R Steering Assist not reachable

    I don’t know what to try anymore. Maybe somone here has an idea...
  17. V

    Polo 6R Steering Assist not reachable

    Hello, I have a very strange problem with a Polo 6R. The 44 Steering Assist was not reachable. I have tried 3 different Steering Pumps. All have same problems. I have tried these thing: - Other 09 Central Electronics - Other slip ring - Canbus wiring straight to BCM - Ignition supply straight...
  18. V

    Heated steering wheel retrofit

    post more recent scan to check pls. Because I think what george say scan was before retrofit. What part no have you use?
Top