Search results

The sensor just popped out of the mount is in the same position The problem is that I have no adaptation or reset

The bugs have been removed CAN Gatqeway cleared All I have left is a radar error Please give me a hint. What is the sensor adaptation procedure

So it jumped out of the upper hook, now it has been properly mounted but unfortunately the error cannot be removed. Now how do I calibrate this sensor correctly

Friday,06,November,2020,10:23:59:51259 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 20.4.2.0 (x64) HEX-NET CB: 0.4513.4 Data version: 20200730 DS317.0 www.Ross-Tech.com Dealer/Shop Name: ELMAR Chassis Type: AU-VW37 (3Q0) Scan: 01 02 03 08 09 10 13 15 16 17...

Well done iichel coding matched

The pump has been changed Yes vin is valid

The pump has lost the coding, please help Tuesday,27,October,2020,15:50:41:51259 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 20.4.2.0 (x64) HEX-NET CB: 0.4513.4 Data version: 20200730 DS317.0 www.Ross-Tech.com Dealer/Shop Name: ELMAR VIN: WVWZZZ13ZDV003467...

@Jacek: Dam rade i po Polsku :thumbs: działam I experimented moments and after writing ENG116959-ENG116309-Leuchte23SL HLC10-Lasttyp 23, 40-allgemeine LED ENG116960-ENG116328-Leuchte24SL HRA65-Lasttyp 24, 40-allgemeine LED I deleted the errors I'm trying to do what @Jacek: sent

@DV52 I made changes to the BCM as recommended and it still did not help 2 error about parking light failure Address 09: Cent. Elect. (J519) Labels:| 5Q0-937-08X-HV1.clb Part No SW: 5Q0 937 086 AE HW: 5Q0 937 086 AE Component: BCM PQ37BOSCH 028 0145 Revision: --------...

@DV52: I did not change the installation with the lamps and the BCM I just put it on and it shines, but in emergency mode, i.e. after turning on the parking lights, the led is on and the other bulbs are illuminating for about 50%, the fog and the led stop lights also have an emergency 50%

The lamps LED are original Skoda octavia

;SW:5Q0-937-086-AE HW:5Q0-937-086-AE --- Cent. Elect. ;Component:BCM PQ37BOSCH 028 0145, Coding:0C001A464247227B4FE44004001C17080000000000000000000000000000 ;EV_BodyContrModul1UDSBosc,014004,EV_BCMBOSCH_014.rod ;Thursday,15,October,2020,17:44:07:51259 ;VCDS Version: Release 20.4.2 (x64) Data...

:banghead: Can't load scan into post

My post is asking for help with BCM adaptation and coding Link to my topic LOG. https://forums.ross-tech.com/index.php?threads/25077/

Skoda Octavia rear lamps have been replaced with led need to save BCM. I am asking for help in long coding and adaptation of the BCM module. I have B12BF and B12BE error now Thursday,15,October,2020,10:16:17:62545 VCDS -- Windows Based VAG/VAS Emulator Running on Windows XP x86 VCDS Version...