Search results

  1. M

    2010 Golf TDI: Terminal 30 Relay ID and replacement

    Thanks Uwe, I now have the correct wiring diagram and I realize it's Terminal 15, J329 which I believe is the top left relay in the footwell area. And so any easy way to get at that relay?
  2. M

    2010 Golf TDI: Terminal 30 Relay ID and replacement

    All I have two questions: -Which relay in my 2010 golf TDI handles power for Terminal 30? -How do I access the upper level relays in the driver footwell area?
  3. M

    People renting VCDS

    Uwe, Is this something you condone? https://www.ebay.com/itm/7-Day-Rental-Ross-Tech-Cable-HEX-NET-USB-VCDS-Vagcom-VW-Audi-with-Software/223833981876
  4. M

    2011 Audi A3 TDI, engine swapped, car won't move

    All, Swapped the engine in a 2011 A3 TDI. Engine starts and runs fine: -At first when I would shift it into gear the car would stall. So I pulled the battery ground to reset the ecu. -Then when I would shift into gear the engine would load up very slightly but the car would not move. -Then I...
  5. M

    2011 a3 Tdi engine swap thermostat housing problem

    Swapping the motor on a 2011 a3 tdi cbea. Got a donor cbea from an 09 Jetta. My old motor has this thermostat housing https://www.idparts.com/tdi-thermostat-03l121111ac-mahle-ti3387-p-7471.html and the coolant pipe meets the curved elbow on the housing The replacement motor has this thermostat...
  6. M

    Need coding for blank ABS module (MK60EC1)

    I bought a 2010 Jetta and I believe the ABS module has been replaced as the coding for it is zeroed out. Can anyone provide the correct coding. Full scan below: Thursday,12,September,2019,18:50:35:53825 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 18.9.0.2...
Top