Search results

Issue in question is related to this fault code: 16351 - Control Module - Programming Error 000 - - - MIL ON Freeze Frame: Fault Status: 11100000 Fault Priority: 6 Fault Frequency: 5 Reset...

Yes I know Win7 is obsolete ;) Although Win7 is done I need to use it due to "Reasons". When I disconnect Hex-NET while on active connection whole vcds crashes. I need to restart the application. It didn't happen on older 19.x release.

Hi, Although not supported by VCDS, it can access module. But because of missing asam for 17 and 19 doesn't populate installation list. I tried making my own autoscan list but there are still missing modules like: *Rear End Module *Telematics Module *Slide Door Right maybe(how does this car...

Can only be described with picture.

This 2018 ecoUP didn't have cruise from factory. I helped a guy out and installed it. All new wiring done from scratch. Also added wire for later MFSW. VCDS is missing out a ton of information. Like Coding table for BCM and ECU. Luckily it is like Polo BCM so cruise bit was same, ECU info I...

Hi, Did another Lane assist, pretty used to this by now. New windshield, wiring, cover etc.... . Did also RLS, but that is another story. I was able to code everything and everything works as supposed to. Lane Assist is OK, HBA is also OK, sign assist works partial because of RNS315 - waiting...

Hello, I'm repairing this faulty NAR RNS510 that has SWL issues and I could really use newer fw to fix it. I'm able to find some sales on eBay and forums, but every one of them sends disc out is physical form, which is quite tricky considering the distance. If You think You could help me, can...

14846 - Turbocharger Boost Control Position Sensor Circuit P2563 00 [096] - Implausible Signal Intermittent - Not Confirmed - Tested Since Memory Clear 15202 - Actuator Module for Turbocharger 1 P00AF 00 [109] - Stuck Confirmed - Tested Since Memory...

Hi Recently I did Q7 2007 retrofit from old taillights to facelift taillights. That is all sorted and working. What I wanted to ask is that while replacing the needed CCM module, I noticed replacement CCM has coding enabled that doesn't have description. Address 46,4L0 910 289 K,recoded...

Tuesday,26,March,2019,17:23:21:21782 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 18.9.1.0 (x64) HEX-NET CB: 0.4502.4 Data version: 20190215 DS296.0 www.Ross-Tech.com Dealer/Shop Name: LeVWFreaks.eu VIN: VSSZZZ5FZKR License Plate: CUPRA Mileage...

Sunday,17,March,2019,17:20:09:21782 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 18.9.1.0 (x64) HEX-NET CB: 0.4502.4 Data version: 20190114 DS296.0 www.Ross-Tech.com Dealer/Shop Name: LeVWFreaks.eu VIN: WVGZZZ5NZKW License Plate: TIGUAN EGON Mileage...

Best demonstrated with video. If I open Adv-MVB and start typing before channels are loaded VCDS freezes. If I wait, I can search as usual. I usually know what i want so fingers are quicker than PC. :) PC is as usual per spec: Lenovo T420 with somesort of i5 CPU and 8GB of RAM. Link to video...

Greetings Is there any way currently to create only admaps of all modules in car without blockmap, of which I'm not aware. Reason behind here is purely time. I would like to create many more admaps of cars that I scan, but sometimes the blockmaps are roughly half of scanning time. On cars...

Thursday,20,December,2018,21:43:27:36026 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 18.9.0.1 (x64) HEX-NET CB: 0.4449.4 Data version: 20180927 DS296.0 www.Ross-Tech.com VIN: WAUZZZF41JA License Plate: ADMAP SCAN Mileage: 7160km-4449mi Repair Order...

Hi, I noticed that on Passat B8, in ODIS 05 - Acc/Start Auth. is not address 05, rather B7. Same goes for Park/Steer assist 10->76. I don't have example picture here, but why is that so? Thanks!

Hi On never A6-s there appears a window, when setting CCS speed to show speed currently SET. On older A6-s, such window doesn't appear. Is this something that perhaps could be changed with VCDS or maybe different ECU software like on PQ35 models, where Skoda doesn't show set speed, but VW does...

Sunday,16,September,2018,18:38:46:36026 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 18.7.2.1 (x64) HEX-NET CB: 0.4436.4 Data version: 20180808 DS295.0 www.Ross-Tech.com VIN: WVWZZZAUZFP License Plate: TIMMI G7 MARIA SÕIDAB Mileage: 66780km-41495mi Repair...

Sunday,16,September,2018,17:47:00:36026 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64 VCDS Version: 18.7.2.1 (x64) HEX-NET CB: 0.4436.4 Data version: 20180808 DS295.0 www.Ross-Tech.com VIN: WVWZZZAUZFW License Plate: TIMMI G7 Mileage: 39461km-24519mi Repair Order...

Saturday,15,September,2018,20:19:14:49581 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64(VirtualBox) VCDS Version 18.2.0.3 (x64) HEX-V2 CB: 0.4427.4 Data version: 20180212 DS287.0 www.Ross-Tech.com VIN: WVWZZZ3CZFE License Plate: ALGNE Mileage: 88095km-54739mi Repair...

Hello During AID retrofits I've encountered a module BF02 not being registred when identifying with ODIS. Is this something that's hidden somewhere or can VCDS also show this? When doing AID retrofit i always use ODIS - You know, immobiliser and stuff... and i think that is the reason I've...