- Joined
- Jan 4, 2023
- Messages
- 10
- Reaction score
- 5
- Location
- East Yorkshire, UK
- VCDS Serial number
- C?ID=531536
Hi,
received my HEX-V2 from Gendan yesterday and auto-scanned my 8H 2006 Audi A4 Cabrio 3.2 Quattro (attached).
Amongst other issues, the car has a headlight switch with 'auto' setting, auto lights have never worked in the time I have owned it.
The central electrics module has the following info:
Address 09: Cent. Elect. Labels: 8E0-907-279-8EC.LBL
Control Module Part Number: 8E0 907 279 N
Component and/or Version: int. Lastmodul ECE 1107
Software Coding: 10001
Work Shop Code: WSC 06441
VCID: 3D2735989462AA63C04-4AA4
3 Faults Found:
01518 - Bulb for Back-Up Lights; Left (M16)
30-00 - Open or Short to Plus
02737 - Bulb for Tail/Fog Light; Right
30-00 - Open or Short to Plus
01794 - Control Module - Incorrect Chassis (VIN) Number
35-00 - -
I assume the module has been changed at some point and the VIN number not updated.
Does the '-' after '35-00 - ' mean there is no VIN number installed in the module?
The current coding for the unit (10001) is:
1 - Avant
0 - Rain/light sensor not installed
0 - Trailer hitch not installed
0 - Halogen headlights w/o daytime running lights
1 - Rest of World Countries with Bi-Xenon
Obviously Avant is not correct and I assume the vehicle has a rain/light sensor as it has an 'auto' position on headlight switch.
I believe coding should be 21001; I'm a little unsure about the halogen/bi-xenon - I believe the vehicle has halogen not bi-xenon headlights but have no way of confirming this, I'm not sure if you can confirm visually; is there a visual difference between the halogen and bi-xenon headlights (outside the different light colour/temperature)?
I can recode the module with HEX-V2 once I am happy that 21001 is correct, with regard the incorrect VIN in Cent. Elec. wiki states:
Channel 081: Component Protection
To start the process of Vehicle Identification Number (VIN) learning, enter/save 46992 as new value.
Are there any precursor steps necessary before trying this? I assume I:
Click 'Select'
Click '09-Cent. Elect.'
Click 'Adaptation - 10'
Type '081' in Channel
Click 'Read'
Type '46992' in New value
Click 'Test' or 'Save'? Understand Test is to evaluate effect of change but I am unsure what effect should be (i.e. what should happen or if anything visible should happen).
Should VIN learning happen immediately/quickly? Are there any further steps? Does the value for Channel 081 need to be returned to previous once VIN learning complete?
Thanks in advance for any help.
Chris.
received my HEX-V2 from Gendan yesterday and auto-scanned my 8H 2006 Audi A4 Cabrio 3.2 Quattro (attached).
Amongst other issues, the car has a headlight switch with 'auto' setting, auto lights have never worked in the time I have owned it.
The central electrics module has the following info:
Address 09: Cent. Elect. Labels: 8E0-907-279-8EC.LBL
Control Module Part Number: 8E0 907 279 N
Component and/or Version: int. Lastmodul ECE 1107
Software Coding: 10001
Work Shop Code: WSC 06441
VCID: 3D2735989462AA63C04-4AA4
3 Faults Found:
01518 - Bulb for Back-Up Lights; Left (M16)
30-00 - Open or Short to Plus
02737 - Bulb for Tail/Fog Light; Right
30-00 - Open or Short to Plus
01794 - Control Module - Incorrect Chassis (VIN) Number
35-00 - -
I assume the module has been changed at some point and the VIN number not updated.
Does the '-' after '35-00 - ' mean there is no VIN number installed in the module?
The current coding for the unit (10001) is:
1 - Avant
0 - Rain/light sensor not installed
0 - Trailer hitch not installed
0 - Halogen headlights w/o daytime running lights
1 - Rest of World Countries with Bi-Xenon
Obviously Avant is not correct and I assume the vehicle has a rain/light sensor as it has an 'auto' position on headlight switch.
I believe coding should be 21001; I'm a little unsure about the halogen/bi-xenon - I believe the vehicle has halogen not bi-xenon headlights but have no way of confirming this, I'm not sure if you can confirm visually; is there a visual difference between the halogen and bi-xenon headlights (outside the different light colour/temperature)?
I can recode the module with HEX-V2 once I am happy that 21001 is correct, with regard the incorrect VIN in Cent. Elec. wiki states:
Channel 081: Component Protection
To start the process of Vehicle Identification Number (VIN) learning, enter/save 46992 as new value.
Are there any precursor steps necessary before trying this? I assume I:
Click 'Select'
Click '09-Cent. Elect.'
Click 'Adaptation - 10'
Type '081' in Channel
Click 'Read'
Type '46992' in New value
Click 'Test' or 'Save'? Understand Test is to evaluate effect of change but I am unsure what effect should be (i.e. what should happen or if anything visible should happen).
Should VIN learning happen immediately/quickly? Are there any further steps? Does the value for Channel 081 need to be returned to previous once VIN learning complete?
Thanks in advance for any help.
Chris.
Code:
Chassis Type: 8H (8H - Audi Cabrio B6/B7 (2003 > 2009))
Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 26 36 37 45 46 55 56 57
63 65 67 73 75 76 77
VIN: WAUZZZ8H17K000676 Mileage: 196440km-122062miles
-------------------------------------------------------------------------------
Address 01: Engine (AUK) Labels:. 06E-910-559-BKH.clb
Part No SW: 8E0 910 559 Q HW: 8E0 907 559
Component: 3.2l V6 FSI 0020
Revision: --H16--- Serial number:
Coding: 01040003180F0120
Shop #: WSC 00672 785 00200
VCID: 3B233B808F66A453FE0-806E
VINID: 9D196AAAA2180476C00001871897D61152
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-910-517.clb
Part No SW: 8E0 910 517 E HW: 8E0 614 517 AL
Component: ESP8 quattro H05 0120
Revision: 00000000 Serial number: 00000000000000
Coding: 0004379
Shop #: WSC 00508 210 59464
VCID: 290FF1C875FA26C39CC-807C
1 Fault Found:
00287 - ABS Wheel Speed Sensor; Rear Right (G44)
012 - Electrical Fault in Circuit
Freeze Frame:
Fault Status: 01101100
Fault Priority: 2
Fault Frequency: 9
Reset counter: 40
Time Indication: 0
Freeze Frame:
Hex Value: 0x7200
Hex Value: 0x4306
Hex Value: 0x0009
Hex Value: 0xB0AF
Hex Value: 0x0001
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8E0-820-043.lbl
Part No: 8E0 820 043 BM
Component: A4 Klimaautomat 2832
Coding: 00100
Shop #: WSC 00672
VCID: 6D87C5D88482FAE3304-50F4
4 Faults Found:
01810 - Actuating Motor for Temperature Flap; Right (V159)
41-00 - Blocked or No Voltage
01842 - Potentiometer/Actuator for Temperature Flap; Right (G221)
30-10 - Open or Short to Plus - Intermittent
01842 - Potentiometer/Actuator for Temperature Flap; Right (G221)
29-10 - Short to Ground - Intermittent
00819 - High Pressure Sensor (G65)
07-10 - Signal too Low - Intermittent
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-907-279-8EC.lbl
Part No: 8E0 907 279 N
Component: int. Lastmodul ECE 1107
Coding: 10001
Shop #: WSC 06441
VCID: 3D2735989462AA63C04-4AA4
3 Faults Found:
01518 - Bulb for Back-Up Lights; Left (M16)
30-00 - Open or Short to Plus
02737 - Bulb for Tail/Fog Light; Right
30-00 - Open or Short to Plus
01794 - Control Module - Incorrect Chassis (VIN) Number
35-00 - -
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8H0-959-655-94.lbl
Part No SW: 8H0 959 655 E HW: 8H0 959 655 E
Component: Airbag 9.42 H09 1840
Revision: 92H09184 Serial number: 0037Y0001LYE
Coding: 0071114
Shop #: WSC 00672 785 00200
VCID: 3C21389C8A68A36BF7A-8068
Subsystem 1 - Serial number: 6332BRB4009B3B13J
Subsystem 2 - Serial number: 6342BRB4009B46BE.
Subsystem 3 - Serial number: 63729RB400C6EC43Y
Subsystem 4 - Serial number: 63829RB400C6EBD0/
2 Faults Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 2
Fault Frequency: 2
Reset counter: 255
Time Indication: 0
01316 - ABS Control Module
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Time Indication: 0
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 R
Component: Lenksáulenmodul 0501
Coding: 04041
Shop #: WSC 00508
VCID: 42DD4664ED9CD59BBD6-4AA4
1 Fault Found:
01301 - Control Module for Voice Recognition (J507)
49-00 - No Communications
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8EC.clb
Part No SW: 8H0 920 981 E HW: 8H0 920 981 E
Component: KOMBI+WFS 4 H12 0110
Revision: 0110 Serial number: 00000000000000
Coding: 0023411
Shop #: WSC 00508 210 91413
VCID: 323D16A4583C651B2D6-5118
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer Labels: 8E0-920-9xx-8EC.clb
Part No SW: 8H0 920 981 E HW: 8H0 920 981 E
Component: KOMBI+WFS 4 H12 0110
Revision: 0110 Serial number: 00000000000000
Coding: 0023411
Shop #: WSC 00508 210 91413
VCID: 323D16A4583C651B2D6-5118
No fault code found.
-------------------------------------------------------------------------------
Address 26: Auto Roof Labels: 8H0-959-255.clb
Part No: 8H0 959 255 A
Component: VSG B6 CABRIO 6792
Shop #: WSC 00672 785 00200
VCID: 343110BCA2286B2B3FA-50F4
1 Fault Found:
00532 - Supply Voltage B+
015 - Cannot Be Tested at this Time - Intermittent
-------------------------------------------------------------------------------
Address 37: Navigation Labels: 8E0-035-192-RNSE.clb
Part No SW: 8H0 035 192 A HW: 8H0 035 192 A
Component: RNS-E HIGH EU H70 0650
Revision: 01S Serial number: AUZBZ7E1201285
Coding: 0419717
Shop #: WSC 00508 210 59464
VCID: 2517FDF819C202A3B84-5160
3 Faults Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 7
Fault Frequency: 3
Reset counter: 164
Time Indication: 0
Date: 2018.08.23
Time: 10:06:44
Freeze Frame:
Voltage: 11.90 V
00446 - Function Limitation due to Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 7
Fault Frequency: 8
Reset counter: 164
Time Indication: 0
Date: 2018.08.23
Time: 08:06:33
Freeze Frame:
Voltage: 11.90 V
Mileage: 655350 km
Count: 65535
Clock: 255:255
01317 - Control Module in Instrument Cluster (J285)
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 5
Fault Frequency: 2
Reset counter: 149
Time Indication: 0
Date: 2005.02.10
Time: 00:00:31
Freeze Frame:
Bin. Bits: 11011011
Bin. Bits: 11
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 8E0-951-177.lbl
Part No: 8H0 951 178
Component: Innenraumueberw. 0411
Coding: 00001
Shop #: WSC 00000
VCID: 6FBBDFD08E8E08F3028-50AE
1 Fault Found:
01349 - Alarm via Theft Warning System; Front
43-00 - Closed
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels:. 8E0-959-433-MAX.clb
Part No: 8H0 959 433 H
Component: Komfortgerát T3B 4135
Coding: 06799
Shop #: WSC 00672
VCID: 392F2188804A9643ECC-4AA4
Subsystem 1 - Part No: 8H2959802D
Component: Tõrsteuer.FS BRM 1205
Component: Tõrsteuer.BF BRM 3020
9 Faults Found:
01134 - Alarm Horn (H12)
29-00 - Short to Ground
01370 - Alarm triggered by Interior Monitoring
35-00 - -
00962 - Alarm via. Tilt Sensor
35-00 - -
01368 - Alarm triggered by Luggage Compartment Switch
35-00 - -
01369 - Alarm triggered by Hood Switch
35-00 - -
01374 - Alarm triggered by Terminal 15
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
00892 - Switch for Trunk Closing Cylinder (F248)
27-10 - Implausible Signal - Intermittent
00955 - Key 1
35-10 - - - Intermittent
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-192-RNSE.clb
Part No SW: 8H0 035 192 A HW: 8H0 035 192 A
Component: RNS-E HIGH EU H70 0650
Revision: 01S Serial number: AUZBZ7E1201285
Coding: 0419717
Shop #: WSC 00508 210 59464
VCID: 2517FDF819C202A3B84-5160
3 Faults Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 7
Fault Frequency: 3
Reset counter: 164
Time Indication: 0
Date: 2018.08.23
Time: 10:06:44
Freeze Frame:
Voltage: 11.90 V
00446 - Function Limitation due to Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 7
Fault Frequency: 8
Reset counter: 164
Time Indication: 0
Date: 2018.08.23
Time: 08:06:33
Freeze Frame:
Voltage: 11.90 V
Mileage: 655350 km
Count: 65535
Clock: 255:255
01317 - Control Module in Instrument Cluster (J285)
008 - Implausible Signal - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 5
Fault Frequency: 2
Reset counter: 149
Time Indication: 0
Date: 2005.02.10
Time: 00:00:31
Freeze Frame:
Bin. Bits: 11011011
Bin. Bits: 11
-------------------------------------------------------------------------------
Address 76: Park Assist Labels: 8E0-919-283-8EC.lbl
Part No SW: 8E0 919 283 D HW: 8E0 919 283 D
Component: Parkhilfe 4-Kan H06 0010
Revision: 00H06000 Serial number: 00067802020532
Coding: 0000024
Shop #: WSC 00672 785 00200
VCID: 313F19A85D0A5E0354C-5184
No fault code found.
-------------------------------------------------------------------------------
Address 77: Telephone Labels: 8P0-862-335.lbl
Part No SW: 8P0 862 335 F HW: 8P0 862 335 F
Component: FSE_255x BT H21 0190
Revision: 00000001 Serial number: 00000000350398
Coding: 0011802
Shop #: WSC 00672 785 00200
VCID: 392F2188854A9643ECC-50F4
No fault code found.
End----(Elapsed Time: 05:39, VBatt start/end: 11.9V/11.9V. VIgn 11.9V)-----