IBIZA 6L LOST CODING ABS AGAIN AND AGAIN

[abrara]

hi all pepole !
thank for help,
gateway don't have instalation liste , and helpcoding is :
1 auto trans (trough my 2001 and pq24 ibiza)
2 brake electric
4 airbag for vw transporter multivan
8 steerring aid only pq24 ibiza
2+4+8 =14
i think the coding is ok , but why he need to communicate to selecter and all wheel drive , i don't know ......

when i connect the used parts , in first dtc , wrong coding not present, they come 30s after clear the dtc , the dash ligth flashing same

I don't think the abs unit is involved, just as the original abs unit is involved, I think the client did something that he doesn't say, or remember, before here people ride with the lights without worrying, and since may, the car control rule has changed and requires people to repair them when they light up, so I don't know what was done on this car really, nobody has a seat 6l here to compare the coding? from 2006 asz engine, 6 speeds?

 

[abrara]

is there no one who can help me?i need resolve this probleme

now i am verified , it's possible to transfert this post in other section ?

 

[Uwe]

now i am verified , it's possible to transfert this post in other section ?

Moving to Car Repair Support.

-Uwe-

 

[Jack@European_Parts]

How loose is it, can you feel the sides?

Coding: 00188

Perform adaptions as per wiki and in same session of coding.

If there are faults for G85 or a speed sensor they must be fixed first!

JPPSG

Sticky - Jacks Professional Problem Solver Guide. "JPPSG"

Jacks Professional Problem Solver Guide. "JPPSG" Make / Model / Year / Edition. Step 1 Tag of PR-Build data picture posted ( Last 6 of VIN can be omitted for privacy ) Step 2 Status of car stock or modified in any way? If so list! Step 3 "VCDS" COMPLETE Auto-Scan in code tags! Step 4...

forums.ross-tech.com

Try here

Audi A6 (4B) Brake Electronics (Bosch 5.7) - Ross-Tech Wiki

wiki.ross-tech.com

 

[abrara]

hi , sorry , i don't understand,

dtc of sensor speed is ok,


g85 isn't possible when abs unit don't have coding

first, he accepted, and i am speed for calibrate g85 is ok , but immediatly lost coding ,and calibrate is error


i need to writte coding first, but i think abs unit look parts on CAN , and he not ok with , and he eject coding


but i don't no where is probleme on CAN


you want me to test coding 00188 in the abs block?

thank for help me

 

[PetrolDave]

first, he accepted, and i am speed for calibrate g85 is ok , but immediatly lost coding ,and calibrate is error

Did you stay in the same session (i.e. NOT exit the controller in VCDS) when trying to calibrate G85?

 

[abrara]

yes, but lost coding, and error g85 next
light on dash always flashing

sorry , but how i can post video ?i don't how post it
( and very very bad english sorry for read me ...)

 

[abrara]

How loose is it, can you feel the sides?

i don't understand ?

 

[PetrolDave]

i don't understand ?

Jack is joking because you have typed "loose" (meaning something is not tight) instead of "lost" (meaning you cannot find something)

 

[abrara]

yes, thanks for explaining, very difficult for me to discuss in english ....

 

[NEtech]

Keep away from the Fault Codes button!
After you entered [Coding II - 11] 40168, do basic setting, like explained here.
If that is successful, quiet VCDS, Ignition OFF 10 sec.

 

[abrara]

I can remake a video, without doing anything, the coding disappears, I just show that it accepts the coding, that a matter of time, the g85 is not the cause ........ it does not is that the consequence, I have to solve the coding which jumps, the g85 will have no problem of calibration then
I have already tried to switch off the contact to validate the recording of the coding, it has no effect, which also seems odd to me, the code "imp" is never written

 

[Jack@European_Parts]

You are ending the session each time exiting the ABS controller before login and not performing any adaption, additionally your tester is not configured for WSC and Importer ID or tester number!

Coding: 00188

 

[abrara]

thank for help jack ,
Can you explain to me precisely the right method to validate the coding

can you also tell me what your code (00188) corresponds to, and where and when I should use it

 

[Jack@European_Parts]

SVM...................See Dealer and RTFB.

Official Factory Repair Information - Ross-Tech Wiki

wiki.ross-tech.com

 

[abrara]

hi , sorry jack , i don't understand ,I do not understand the subtleties of your answers and your language .... can you explain to me more clearly, sorry not to understand