sers77

Thank you..

yes, possible PCB/LCD this same

I have a Passat AID but only a Golf to use it in.. Is it possible to use the cover and frame from a Golf 7 AID to put the Passat AID...

Tried again with new gateway... And still impossible to get rid of the dtc for abs (on 13 acc).. As the acc never shuts down and draws...

For perpendicular parking you need to press the park assist button twice. It should have right parameters already so you should be good...

It´s from a E-Golf 2017, but can´t find any other 5QA module with same HW and SW.. 5QA 919 298 E HW: 5QA 919 298 A Component: PLA...

Something is definitely wrong with the pla module, or I have the wrong one. The SW is not the same as the others and it doesn't park the...

How do I get the PDC to show up (without pressing Menu) when reverse cam (low) is active? Saturday,04,June,2022,17:51:15:21522 VCDS...

Had only front left after retrofitting the 5Q0 amp, now with CP off all is well.. Updated HVAC (address 08), when I had odis online...

Gave up and bought a MIB2 amp.. Also removed BF09 as it created DTC because I don`t have LED headlights.. Now it`s looking much better...

No, 3Q0907530Q.. Will upload new scan and info later.. Doing some cp off on amp now..

Gateway flashed to Q and working well..

Yes, but I have tried all that is possible. Nothing will make this gateway work. Last resort is AC, if not I´ll just buy a new one..

I have tried ticking all of them (although not at once :rolleyes:)..

Think I have tried around 30 with VCP and ODIS.. All AA (and some others) I could find.. Maybe this one can solve it: FL_3Q0907530AC...