Souriau

That is because Coding in [19-CAN gateway] is wrong. Use: F9807F060002021003

The customer bought the car at the car auctions. There is no service history with it. I must check the chassis number on the vehicle...

PR Codes 0EJ Installation differentiation for transmission MQ 250 0F9 Cooled fuel system for diesel engine 0FG Mosel manufacturing...

That did not work either. Tuesday,31,January,2023,09:08:36:46973 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS...

Hello, I fitted a new wheel bearing on the rear left. The reluctor ring was badly rusted. A short drive and lock-to-lock steering, hey...

Since the car has no ACC, it definitely isn't. What transmission does it have? 5 speed or 6? Can you post PR-Code data please? -Uwe-

In most cases, according to the VIS database, the coding is 0002322, then follow 0000274; 0000277; 0002325 etc.

There is no PR list in the car, no service schedule booklet and no PR data lable in the boot. It is a 5 speed manual gearbox.

None of these codes have cleared the "01044 - Control Module Incorrectly Coded"

Hello, Is this the right ABS coding for this car? S Monday,30,January,2023,12:16:35:46973 VCDS -- Windows Based VAG/VAS Emulator...

Definitely looks like something wonky with the left rear. Unclear whether it's the bearing, the encoder ring, or the sensor: -Uwe-

OK,I have completed a ABS whell sensor speed test and logged the data. Even ther was no DTC in the ABS. From the log listed below, Is...

I took the steering angle sensor out of the steering column to see what fault code am I getting. I am trying to determine with G85...

MVB and Adaptions valuse for ABS 03 ;SW:1K0-907-379-AC HW:1K0-907-379-AC --- ABS Brakes ;Component:ESP FRONT MK60 0101...

MVB and Adaptions valuse for Steering 44 ;SW:1K2-909-144-M HW: --- Steering Assist ;Component:EPS_ZFLS Kl.069 H08 1901, Coding...