Jetta 97's latest activity

I can say you have 100% bad ECU , It can not be reach with VCDS at all, and some other modules do not have communication with ECU. The...

What Spark plugs did you put in and where did you get them?

Same here , from my long term experience VW will never take aftermarket CAT for good. Some will hold up 6 to moths and that is most I...

Call me cynical if you wish, but I don't have high hopes for "universal" CATs ever passing. -Uwe-

The final display in 0x01-04-046/47 should state CATB1OK & CATB2OK Is this car modified FOD?

You want to do CAT basic settings in 0x01-04-044/5/6 & 7 for pre and post CAT tests and upper 200>235 with a bin bit result of 100 as...

What you asking in not VCDS job. You need to talk to TUNER to tune transmission software for more HP and Torque.

Hello, As you mentioned, an Auto-Scan would be great! So, (1) can VCDS " adapt gearbox?", short answer is not exactly, there is no...

Both fans need to be working at same time, Most likely you have Bad fan and that will be Small fan that usually go bad.

Did you try adapting the cluster and key to ECU and not ECU to cluster? 0x01-11/16 login & after successful login, then proceed to...

Yes. You can send the cluster out to a specialist. They can remove the Immo from the cluster. for more information, PM me.

The question is why you want to do this? There is nothing wrong with Stock idle, I have test many R32 and not seen any problem with it .

No login needed to raise rpm 50 up/down 0x01-10-01 input Q

With flat battery it can be that some modules got data corrupted , Flat battery is really bad thing to do in new car , Modules are very...

I would clear all these fault codes. Do it in 01-Engine, as well as [Clear All] on the Auto-Scan screen. Then let's see what comes...