user55645

Well, good news. I cleared the codes and only the Cruise Control Switch came back. Looks like I should be good to go. Thank you for all...

The ignition switch you speak of is 1K0905849B? I found this vid on how to access, remove, and replace. Seems straightforward and not...

Understood What about trying to clear all the codes outside the Airbag 15 section? I should do this, cycle, and rescan, correct? If...

Roger Should I go through and clear the faults in the other systems, to see what pops back up? Will I need the Security Code, similar to...

Makes sense. On a slightly different note, but same topic. I emailed the service manager, to get a better understanding of what the...

I still need them to perform a state required airbag system certification. I'll start making waves after payment 😉

@davisev5225 @Uwe Thank you, gentlemen. I believe it is all sorted and rests solely on a dishonest VW tech. The #4 fuse was not only...

Thank you for the clarification on the comms reading/code Let's assume the harness is firmly seated in the module and the harness from...

I have been both successful and unsuccessful with this walkthrough. It took 3 tries before the dash light disappeared. About 1min after...

Wednesday,09,April,2025,07:25:29:06299 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 25.3.0.4 (x64)...

Understood. With this being known, what would be the workflow to reset the module (using the screen provided)? Just trying to get this...

I'll have to do this tomorrow, as the car is at work. In the mean time, can you say why I'm not getting the screen as described? I read...

Hey, everyone. I have an 08 Rabbit that needed the PODs module replaced. My issue is that the Basic Settings screen looks completely...