Chris Tyas

:eek::banghead: @Uwe just about nailed it. This video: took me there although in UK (on my vehicle) there is no internal boot release...

Gentle bump; looks like input from soft touch switch is working (but oddly described in VCDS), output from convenience module is working...

Thanks for your help Jef 46-08-005.3 is indeed 'Soft-Touch Trunk Lid Release'. Monitoring it I get 'Activated' whilst *not* pressing...

It looks like you should be checking out 46-08-005.3 and see if it changes when you try to operate the soft touch release of the rear...

Replying to my own post... Learnt a load from this very timely thread: https://forums.ross-tech.com/index.php?threads/35806/ Will check...

Hi, Boot (tailgate/trunk) handle has never opened boot on this car since my purchase - does nothing when pressed (squeezed..). Boot...

Those old modules are a bit goofy. I'm not sure whether it's multiple clicks that does the trick or whether just waiting an equivalent...

No, those are the DTC 'status'. For example 30 means "Open or Short to Plus" and 35 is defined as blank. If it had Xenons, it should...

Clicking [Test], should enable the [Save] button. -Uwe-

Hi, Once again, multiple (ten) presses needed on Test to enable Save button. Once Save clicked, all values clear and Test and Saved...

Thanks for your help Uwe. Just lost half an hour to this and achieved nothing; pressing 'read' for channel 081 did nothing so restarted...

Hi, received my HEX-V2 from Gendan yesterday and auto-scanned my 8H 2006 Audi A4 Cabrio 3.2 Quattro (attached). Amongst other issues...