weldersd

This KII dongle works for reading codes, and it did what i needed with the tpms, What will the hex-can do that this one won't, minus the...

Well, with help from that code you just posted, I think i figured it out, so there are a bunch of code bits for pressures with 0.0 bar...

If anybody has the coding for the tire pressure that works, i did not record the original coding now it doesnt work..lol

no. I'm using a KII dual K [redacted] revA

it says auto scan not supported by controller

So I put bigger tires on my touareg, they PSI these tires run is below the stock psi. I had The light on and it did register the tire...

so i found the log with all the basic function codes, I see where you got that from, when you activate that test, it cycles RPM on it's...

Is there a way on VCDS to emulate the drive scenarios where the monitors "test" the systems for functionality before passing? I read...

I'm trying to figure out why my egr monitor is stuck in "failed or incomplete" status when there are no stored codes. Everything seems...

How do I obtain security clearance through VCDS to run adaptations?

apparently. I reflashed with stock tune, I'm replacing the MAF sensor tomorrow, I'll see if that remedy's the problem. basically I was...

i'm thinking it's this MAF code, replace MAF sensor?

here is another auto scan result with a stock ecm flash Monday,28,November,2022,14:59:09:01862 VCDS -- Windows Based VAG/VAS Emulator...

I saw that, but no sympoms accompany this reading, can this car run with a ECM that has intermittent issues?

Monday,28,November,2022,13:31:52:01862 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 22.10.0.1 (x64)...