Recent content by jordy_wd

  1. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Just a quick update. It was the reverse camera unit itself that had failed and was causing the module to not be reachable :facepalm: New camera fitted and all is well again.
  2. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Okay so I may have spoken too soon. The above seems to be what I’ve done when poking about trying to solve this issue. The real issue was with the reversing camera. I disconnected the communication wire between the rear camera and the MMI unit and it solved everything. Wire shown below: This...
  3. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Okay I have finally solved the issue. It was down to the following. See if you can see the issue: The quad lock connector has broken and the grey connector has backed out. After some contact adhesive it is now fully functioning again. I have no idea how this has happened at all and why so...
  4. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Okay thanks for that. Would you have a suggestion of what to try next? I’m thinking of a replacement CAN gateway?
  5. J

    Resolved Help with MMI issues - module 5F cannot be reached

    So I've tried another 5F module and the results are still the same. I'm now thinking it's possibly an ignition issue. Have briefly searched on here re ignition switches and S-contacts but will make a coffee and get properly researching tonight.
  6. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Okay so I've replaced both the head unit and the unit in the glovebox with no change. I'm starting to this it may be an issue with the battery? It is over 8 years old and shows a 50% state of charge on the display. Using VCDS I could see "usable battery charge" was down at 16Ah. Could this...
  7. J

    Resolved Help with MMI issues - module 5F cannot be reached

    I’ve ordered a replacement radio unit after reading this thread: https://forums.ross-tech.com/index.php?threads/31408/ Will probably be a week or two with the Christmas holidays so will update then!
  8. J

    5F-Information Electr. -- Status: Cannot be reached 1100 audi a1 2014 ing on butt no radio help

    Was it the radio screen that solved it or the multimedia unit in the glovebox? Thanks.
  9. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Apologies! Love the meme :p Will check for power at the module.
  10. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Hi Ewe, Yes I’ve checked and double checked all fuses today and still got the same result. I’ve checked and I can’t see any separate fuses for the multimedia system etc. I’m at a complete loss. My battery seems okay, though it is the original one and is 8 years old.
  11. J

    Resolved Help with MMI issues - module 5F cannot be reached

    Hello, I'm having issues with the infotainment system on my 2014 Skoda Octavia (VW MQB platform). The main issue is the infotainment will not switch on with the ignition, will not connect to bluetooth, and will not communicate with the steering wheel buttons or the display in the dash. I...
  12. J

    Trailer tail light errors (left and right) after trailer retrofit

    Hi Uwe, I’ve posted a photo above of the type of tail light, and the bulbs are 12V P21/5W Twin Filament Bulbs. Thanks.
  13. J

    Trailer tail light errors (left and right) after trailer retrofit

    Hello, I retrofitted a Genuine Westfalia trailer module to my 2014 Octavia VRS about 3 years ago. All lights work correctly and the car brings up the trailer on the rear view camera etc. As far as I can see, all coding is correct. I've been towing without issue since I installed it. The only...
  14. J

    New user from the UK

    @Uwe Apologies for the double post - I have now registered by transferring ownership. Could I be verified? Thanks in advance.
  15. J

    New user from the UK

    Many thanks for that. I have purchased the ownership transfer and VIN upgrade today. Auto-scan posted below: Tuesday,09,August,2022,06:44:15:31540 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 22.3.1.4 HEX-V2 CB: 0.4615.4 Data version: 20220407 DS337.0...
Top