rs38's latest activity

On some RHD cars, the manner in which the OBD-II port is installed could be generously described as an "afterthought". There tends not...

Split from a different thread, where the topic was a D4 A8. This message: Is documented at the bottom of the Adaptation Page in the...

-> https://forums.ross-tech.com/index.php?threads/28904/ what part numbers are needed btw?

I think i found it, IDE01992-SFT00222,Installation list: current installations-charging device 1 for mobile end device —-> not...

debug=2 is only valid for Auto scan? So basically the same as doing a controller channel map scan for "whole vehicle" UDS/CAN...

so it worked? what kind of wiring was needed?

and that extension cable connects flawlessly with car's OBD, whereas nearly all OBD plugs have problems?! What's the trick?

it seems that getting 12V is less an issue than having good contact to CAN pins. Are there any tricks to connect the VCDS securely on...

Experience and research. But Dataset are a good source for Login codes, as they often give a first hint, and also a valid login for...