Mrclopec

@AINils I’m confused then. https://forums.ross-tech.com/index.php?threads/36159/ Byte 12 of this 4M6 ESP9 Premium is 5C (01011100) from...

Section 9 is Byte 12

Bump. :cool: @AINils

I didn’t remember where I found the MIB3 coding specifics but I wrote down the related byte/bit changes. I will add you to the starting...

@NEtech @Dana Ack! I Forgot about this sorry. I just replied with the new scan in a PM. Trying to keep this thread clean with original...

Can we confirm "section 9" on this ZDC applies to Byte 15 (and 27 in reverse). Of the scan comparisons I have for several Q8 variants...

https://www.audiworld.com/forums/audi-q8-227/q8-obdeleven-2964504/page6/#post25795034...

@NEtech Yes, I have a functioning G-Meter. I will test out what you recommended and report back.

How the other half live… :)

@NEtech thank you for assisting with those. To help with that label file... I suspect Byte 10 bits 5&6 are as follows: 00 = 0K0 w/o...

You can try this label for engine, copy this redirect and this file to: C:\Ross-Tech\VCDS-Beta\Labels\User or C:\Ross-Tech\VCDS\Labels\User

Sounds good. For now, you can use VCIConfig via USB wire (no car required) > Advanced Tab > Update Channel: Beta > [Change Channel]...

Good morning Dana. Thanks for the offer. Id be happy to try it out.

@Uwe @Sebastian @Dana, do yall happen to have have an experimental label file or a suggested redirect for this ECU with coding...