etz2k's latest activity

It's possible, but it doesn't have to be, because the ABS can't check if all things (for example the size of the brake parts) of your...

Vacuum sensor is only for 1.2TSI, 1.4TSI & 2.0i engine WITH dsg or at (and not 1.9tdi w/o dsg).

Thank you so much!

I'm not Jef, but i recommend to use a -BL or better a -CC ABS. If you have the "new" ABS i can help you with the coding.

I don't think there are Jetta Hybrid PQ25.

Yes, but w/o F2S (the mk60ec1 don't support it properly)

I see no problem with the abs coding, it seems correct. I don't know why you have no basic setting / adaption for the steering angle...

Your VIN is from a Scirocco, please check this.

Yes, for diagnostic communications, all Mk.4 modules use K-Line. However, as of MY 2000, quite a few use CAN bus for communications to...

Is it possible that the ABS ECU support CAN-BUS and K-Line? I read that the diagnostic in all Golf4 use the K-line?

Early Mk.4 cars (Pre-1999) had no CAN bus, so that may be your best choice. -Uwe-

B14B440C492308FD8D1222EC921D1061A70000 Confirmed the above coding is correct as per vin verified via vw server.

Does somebody know if the MK60 (1C0907375L/1C0907379L) or MK20 (1J0907375Q/1J0907379P) from the Golf mk4 will work w/o the canbus for a...

I believe the coding was B14B440C492308FD8D1222EC921D1061A70000, (because the Jetta'12 2.5i have drums and no disks in the rear, no gen3...

Thank you very much Etz2k & Dana for the coding. I can confirm that the code without iTPMS has worked and the coding has been accepted...