auzo63

Is this something that can be done with ODIS?

I would do that but do not have a clue how to?

How do I do that?

that is beyond me I think...

I have ordered an AF gateway, do I just copy the coding from old one to the new one?

I appear to be getting a lot closer... I have got the 5F coded right (just the DAB antenna ti retrofit in the tailgate) and CP to...

I appear to be getting a lot closer... I have got the 5F coded right (just the DAB antenna ti retrofit in the tailgate) However...

No it just has rain/light/humidity sensor.

I have gotten a little further... But still the same issue! Saturday,25,April,2026,21:01:09:28795 VCDS -- Windows Based VAG/VAS...

The old MIB1 unit was totally dead so I was not able to read the coding unfortunately.

I know the DAB antenna is showing a fault, as the vehicle was not fitted with DAB but the MIB2 unit has it, I have fitted a fakra DAB...

I have done everything listed and done a hard reset of the 5F unit but still have the same error message

Address 55,5Q0 907 357 ,channel IDE03642-Presentation mode,adapted from,not active ,to,active...

This is the only way I could find to upload the Adaption Map.

yes I did but no luck