cristo_844

i retrofitted several mib pq in golf 6 and golf 5 and 37 navigation is not active in can gateway instalacion list and informacion is...

I'd coded the new gateway when I put it in to the same coding as the old gateway, 350002. I verified with the long coding helper but it...

insert coding 356062 in 19 can-gateway and then reset the mib then tweak the long coding according to your car options

it MIB, navigation in the instrument cluster the coding must be tweaked in long coding not in the instalacion list!

Remove 37 navigation and add 5F in can-gateway!

Micronas cluster never had 24c64, Only comes with 24c32.

Or read the eeprom it a programer and send the file to my e-mail and I'll make the change!

Eeprom editing...

I think it must be configure over EPP

Thank for the auto-scan... Used the ABS coding from you auto scan in a similar car and worked great!

This not the right place to elaborate!;)

In order to retrofit bi-xenon headlight in a passat B7 had to remove the existing wires in the bcm corresponding to the hold halogen DRL...

yuo need a proper smart key,proper equipment and the remaining keys needs to be readapted because all the informacion hill be lost in...

My unorganized pq35, 46 and 47 test setup! 😁

Fairly easy to test. Your A3 8P has an immobilizer control module (#25) with meas. values which you can check with VCDS. They should be...