Recent content by pyrite-gli

I can confirm that changing the CE back to C6 fixed my incorrectly coded 5F issue!! It was a WLAN option...auto scan below: Wednesday,16,December,2020,18:31:10:41934 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64(Parallels) VCDS Version 20.12.0.0 (x64) HEX-V2 CB: 0.4529.4...

Hey Don - I went back and looked at the long coding for the 5F and the only difference I can see is the last byte of the string changing from C6 to CE Do you know what the difference would be between C6 and CE?? Obviously an adaptation from another module changed this string....hmmm...

Monday,14,December,2020,18:12:43:41934 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 20.12.0.0 (x64) HEX-V2 CB: 0.4529.4 Data version: 20201124 DS322.0 www.Ross-Tech.com VIN: 3VW6T7BU8KM License Plate: Mileage: 16638km-10338mi Repair Order...

Hi Don, I assure you that I only have a VCDS cable and not an OBD dongle - I don't even own a dongle. I do however connect on my Mac using parallels / windows which is why my scans look off...

So I made a little progress on this issue - I found an adaptation in the 5F for the amplifier - so I turned that off and the code for function restriction to the amp is now gone. I also tried turning off #47 in the gateway list and that got rid of code in the #19 Gateway for no communication to...

So I tried reverting back to semi stock coding - I plugged the OEM amp back in and changed the coding back but because the Zen-V was still in the most 150 bus loop it did not fully fix things. I have a support ticket in with Nav-TV to see what they think.

sorry for the missed auto scan: Thursday,03,December,2020,20:01:21:41934 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64(Parallels) VCDS Version 20.12.0.0 (x64) HEX-V2 CB: 0.4529.4 Data version: 20201124 DS322.0 www.Ross-Tech.com VIN: 3VW6T7BU8KMxxxxxx License Plate...

Ok so after fixing the fuse and getting the coding complete for the Zen-V I am having lingering issues in the 5F module - see below. Also the only things that were changed as per nav-tv are as follows: byte 11 = 02 byte 19 = check bit 5 byte 04-07 = change to 00 (the only one that needed a...

found a popped fuse on #7 - a 7.5a - replaced and all good now.....coding complete!!

Hello all, I am in the process of adding aftermarket amps to my 2019 Jetta GLI with beats audio. I am using NAV-TV Zen-V to send optical back to a DSP. My problem is the factory amp under the seat was not in fact MOST bus - it used speaker wire from the glovebox down the factory amp - then...