MVB_

No apologizing needed. Glad you located the root cause of your issue. Did you by chance do a log during your last test, would be...

Uwe, MVB, and Larry You are all a gem, a scholar and a gentleman. I found a few moments to get under the hood and finished up adding...

Look at the time that the data is collected it is not happening simultaneously so the lines will be close but not the same. There is no...

The data from the log file is used for the graph, if you look below the graph the date is displayed in columns, the missing areas in the...

SO looking at the raw data I see no breaks based on the time stamps on the graph.

You have several breaks in the graph from all the sensor logged, did you also have issue with trans that coincide with the make of this log?

Take the log file CSV and drop here https://log.tunezilla.com/ post a link to that log back here.

No coding for battery needed on this MK5 Take a look at this https://forums.ross-tech.com/index.php?threads/25872/

G65 sensor for high pressure on the high side. The only way to know if you have the correct charge is to have the system evacuated and...

You only show 2bar /29psi in system.

Low beam is for your outer H7 on a halogen headlight & High beam is for the inner H7, so change what you need to in 09 Cent. Elect...

Have you tried unchecking in J519 Cecm 09 Cold Diagnosis Low Beam active Cold Diagnosis High Beam active

No issues using Imgur Before the dealer scan After the dealer got a hold of it

Nice you got it fixed, even the gas door flap/lid. If you can post the pictured that would be nice. You can use a site like Igmur or...

Don’t think I won’t expose what happened. Thanks for the group effort all. VCDS and users like you all are good honest folks.