Recent content by jettarv

  1. J

    MK6 Golf 2012 - wrong mirrors direction and missing X/Y position.

    Hi, i believe that your driver module is not the correct one. The 5K0959793A (792A) controllers are found in several cars of the VAG group. The software is designed to be able to adapt to the particularities of each of these cars, but unfortunately the values cannot be modified by VCDS. VCP...
  2. J

    Beetle 2012 - Long coding new ABS 1K0 907 379 BS

    Try this: F43B60F8092700FC2F1106E9901E0041A1180062 / ESP BUTTON =(Short press: ESP SPORT(ASR OFF), long press: ESP OFF) F43B60F8092700FC2F1106E9901E0041A1180072 / ESP BUTTON =(Short press: ASR OFF, long press: ESP OFF) F43B60F8092700FC2F1106E9901E0041A1180092 / ESP BUTTON...
  3. J

    Beetle 2012 - Long coding new ABS 1K0 907 379 BS

    Sorry, Do you have the scan before abs module replacement ? It's easier to create the coding when you have the information.
  4. J

    Beetle 2012 - Long coding new ABS 1K0 907 379 BS

    As-tu un scan complet avant le changement du module ABS ? (avec le module abs #5C0 614 517 B)
  5. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    Hi , you have several problems. I will start by solving the problem of the rear abs sensors. if you have r mk6 golf rear knuckle installed, you need the most accurate sensors for blind spot detection. but the mk6 did not originally have this type of sensor. the resistance in ohms is not the...
  6. J

    01315 In Manual MK6 Golf R after changing Haldex Unit! Need Help Recoding

    You have to do a basic settings in the haldex module 22, unfortunately i did not take note of the group number, but it is one of them: 97, 50, 41, 40 or 20. click on go and then on-off.
  7. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    I'm glad i could helped you!
  8. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    I made this modification on a gti mk6, possible that on a jetta it is different since it never exists in awd. At this point, I can't help anymore..
  9. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    if it doesn't work A14B600C49250103850B06E5921F8041A118F06A try this one A14B600C49250503850B06E5921FA041A118F06A
  10. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    The abs MK60EC1 module is coded from the serial number of the vehicle, so it is impossible to copy from one car to another, it will always be rejected. It takes the coding of your abs module from the car in question that worked before the modification, then we modify it. For the abs sensors, I...
  11. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    I still see the code 18055, the other codes are indeed the wrong rear sensors and the tpms can also be removed
  12. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    it looks like you didn't code your module well, you have to code with this A14B600C49250103850B06E5921F8041A118F06A
  13. J

    ABS Recoding after AWD swap "MK60EC1 H46 0166"

    Hi! Jetta GLI 4motion swap ? what year? Try to code the ecm CPPA to AWD, if it is accepted, the abs error should go away. if it's rejected (error 31!).... You have to code your abs module in Skoda yeti 4x4. Byte 6 = 01 Byte 14 = 80 So: A14B600C49250003850B06E5921F0041A118F06A To...
  14. J

    Replacing a haldex controller, gen 5

    Hi everyone, if that can help anyone. I got this error code on a gen 4 haldex module. It came from an audi A3 09 dsg, and installed on a golf mk6 manual. You have to do a basic settings in the haldex module 22, unfortunately i did not take note of the group number, but it is one of them: 97...
Top