Recent content by Gizmo

  1. Gizmo

    VW ID no longer using CANBUS

    OK this doesn’t look great for VCDS being able to talk to the new VW ID range of cars VW ID.3 - 3 high performance PC and...
  2. Gizmo

    Why would multiple controllers be ‘Cannot be reached’?

    I coded an 2015 Audi A5 today and multiple controllers (01, 02, 04, 15, 42, 52, 62, 6C, & 72) all came back as “Cannot be reached”?? This was on both Beta 19.1.2 and also release 18.9.1 Sunday,07,April,2019,11:02:34:36443VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS...
  3. Gizmo

    2017 Škoda Kodiaq Edition (190 TDi 4x4 DSG)

    March 31st 2017 (MY17) Škoda Kodiaq Edition (190 TDi 4x4 DSG) Auto Scan: Saturday,03,June,2017,16:53:38:36443VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86 VCDS Version: HEX-NET CB: 0.4336.4 Data version: 20170505 DS270.4 VIN: TMBMK7NS3H8010310...
  4. Gizmo

    HEX-NET beeping

    I have just scanned a brand new 2017 Škoda Kodiaq and the LED 1 (car) is flashing red/green but beeping at 1 second intervals. I see that a stuck K line would make the interface beep but I would be only be getting a flashing red LED. It scanned and puled admaps off the car OK as well as...
  5. Gizmo

    MY17 Škoda Kodiaq Edition 190 TDi DSG 4x4 (UK spec)

    Monday,01,May,2017,11:08:04:36443VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86 VCDS Version: HEX-NET CB: 0.4336.4 Data version: 20170413 DS270.4 VIN: TMBMK9NS4H8017066 License Plate: **17 *** Mileage: 150 Repair Order: 1...
  6. Gizmo

    2016 Skoda Fabia & Citygo not DTC scan

    I have recently tried to scan a 2016 Skoda Fabia but I get the message "Function not supported by the gateway" the Fabia was done using 16.3.0 and the Citygo gave me the same message using 16.5.0 I was able to access the controllers and make coding changes on the Citygo (16.5.0) but did not...
  7. Gizmo

    UK MY16 Škoda Superb L&K 190 TDI DSG - 16.3 Test version

    Despite this scan showing: “42-Door Elect, Driver -- Status: Malfunction 0010” there is no DTC showing: Sunday,20,March,2016,12:38:48:28571VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86 VCDS Version: Data version: 20160216 VIN...
  8. Gizmo

    MK3 MY16 Škoda Superb steering wheel with flappy paddles

    Yesterday I tried (without success) to code a 2015 MK3 Superb with a retrofitted MFSW c/w flappy paddles. The steering wheel came out of my new 2015 Superb with just 4 miles on the clock, however I did not drive my car before removal so cannot say 100% that it works, I did however do a scan...
  9. Gizmo

    Widows 10 and HEX NET Config

    My netbook is dying fast and due to ongoing VCDS-Mobile issues I have bought a cheap Windows 10 tablet purely to run VCDS on. However despite using the links on the HEX-NET downloads page to install Java (Version 8 Update 73) and then the HEX-NET Config (both V2.007 and I also tried the older...
  10. Gizmo

    ASAM / rod data updates

    Do you have an idiots guide into installing ASAM and rod data updates anywhere? I manage to update the software without issue each time they are released, however when I get to rod updates it is now just not updating: Yet when I again check for updates it still says “Updated rod data...
  11. Gizmo

    12v power socket (cigarette lighter)

    Is it possible to change the 12v power socket in the boot so it is ignition fed? currently it is permanent live. Ideally by coding but info on any other way is appreciated. The car is a 2015 Škoda Superb MKIII (MQB)
  12. Gizmo

    UK (RHD) 2015 Škoda Superb L&K 2.0 TDi 190PS DSG

    Monday,30,November,2015,11:55:18:22041VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: Data version: 20150904 VIN: TMBBJ9NP9G7029*** License Plate: **65*** Mileage: 4 Repair Order: On Delivery...
  13. Gizmo

    Genuine interface clarification

    A member on another site I moderate on is selling a genuine HEX+CAN interface supplied by an official UK vendor, however it looks completely different to the one you supplied directly to myself, it’s not just the labels but also the moulding of the ODB plug (more in line with the newer HEX-NET)...
  14. Gizmo

    1996 MK3 Golf GTi

    This is the oldest car I have scanned and as such I am not sure if there are meant to be more controllers than what is here? The symptoms are the car refuses to start, it was running dog rough so after some basic checks - fuel sparks etc, the crank sensor has been changed (for a new one) the...
  15. Gizmo

    2014 Škoda Yeti footwell lights

    I am ¾ the way through installing footwell lights in a new facelift Yeti. On previous cars I have taken the power supply from pin B50 on the CECM (white plug) but on the Yeti this is already occupied (and as footwell lights are not an option in the UK on any Yeti it must use another pin). Any...