Bruce's latest activity

I have both VCDS and also ODIS (With geko) they both have there place and times where each is needed. The difference in main stream use...

VCDS cannot code keys owing to practices VAG implemented around 2005 where a dialog between the scan tool, the car and the factory...

I don’t know how VW Israel do it but in the UK you have to go through a very rigorous checking procedure as well as buying the VAS6154a...

Don't get me started on chip shortages; they don't just affect auto makers. It's looking like it might affect scan-tool makers as...

Thank you for the follow up and the additional information; I'm certain the next member who comes along with this issue will find it...

Thanks. You were spot on, took the throttle body off and apart, common gear issue. New set picked up off eBay and installed. Cleared...

Are you aware that you can have both the German and English versions of VCDS installed on your computer? For this forum, would you...

So you should be able to get an explanation from APR more easily than most people...

Success, thanks for your help. :thumbs:

Your interface will allow you to have both English VCDS and Polish VCDS loaded at the same time. Would you mind installing English VCDS...

I figured out the issue! Thanks for the help. I'd meant to just leave it alone and have a pro take a look, after wasting way too much of...

Yep... the shortages are ongoing as I just learned that most of Malaysia has been shut down and the fabs there are not making chips...

Matching keys to MQB requires the factory tool or ODIS software. It also requires a license to use these.. There is no other...

As the guy who has to keep Uwe's bread truck full, I can tell you that at the moment, things are a real challenge. Chip manufacturers...

Is there a wire in Pin 1 of the DLC connector? If so, measure that pin to ground with the key on. Should measure 12 v.