Recent content by torrebasetez

  1. T

    Retrofit Audi A6 C7 Facelit ACC and Matrix; footlights, center console and under seats do not work

    Traductor - Buscar con Google Already solved. The problem was the encoding in byte 16, it was encoded CC (11001100), and the correct one was F3 (11110011).
  2. T

    Retrofit Audi A6 C7 Facelit ACC and Matrix; footlights, center console and under seats do not work

    Sunday,16,May,2021,18:51:06:58101 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 21.3.0.0 (x64) HEX-V2 CB: 0.4543.4 Data version: 20210226 DS325.0 www.Ross-Tech.com Workshop Code: 123 12345 023456 VIN: WAUZZZ4G7GN133678 License Plate: Chassis Type: 4G-AU57...
  3. T

    Retrofit Audi A6 C7 Facelit ACC and Matrix; footlights, center console and under seats do not work

    Hello. I was retrofitted to upgrade to matrix and acc, but noticed that the footwell lights don't work; the lights on the sides of the center console don't work; and the lights under the driver's seats don't work and passenger. I don't know if it could be related to some type of coding in module...
  4. T

    Testbench setup?

  5. T

    Testbench setup?

    Hi. I can't get module 42 to appear..... I have also installed the MIB2, screen and keyboard, and I would like to be able to play by doing tests with bluetooh, carplay, etc... in it, but it asks me to give the contact to the vehicle, I think it is Terminal 15, but no I know how to fix it so...
  6. T

    Testbench setup?

    Monday,14,February,2022,15:42:31:58101 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86 VCDS Version: 21.9.0.2 HEX-V2 CB: 0.4555.4 Data version: 20210903 DS330.0 www.Ross-Tech.com VIN: WAUZZZ4G3HN002331 License Plate: Chassis Type: 4G-AU57 (4G5) Scan: 01 03 05 08 10 17 19...
  7. T

    Testbench setup?

    :othanks.... the truth is that I'll see if I have time and order the wiring a bit, and I'll leave it better. As for the problem, check the installation list of module 19, and units 42,52,62 and 72. Regarding the connection of the CAN, I did it in the GATEWAY unit in numbers 4 and 20, where the...
  8. T

    Testbench setup?

    I also do not understand why if I have connected modules 42 and 72, the scanner also shows modules 52 and 62, if they are not present. I do not get it.
  9. T

    Testbench setup?

  10. T

    Testbench setup?

  11. T

    Testbench setup?

    hello. I have a test bench based on the audi 4G platform. I have some modules connected and they are recognized well. But I try to connect the door modules, and it recognizes it but does not allow access to it. I have connected according to the elsawin diagram, +, - and two CAN, which go to CAN...
  12. T

    Audi A6 4G FL 2016 adjust frame speed and ACC light intensity (leds from 0 to 250 km / h)

    Hi there. I wanted to put the same encoding that I had in my previous unit 17 in byte 03, which was 00. My car is 4G. By now putting byte 03 in 04 it is car 4G2. I don't know if that will influence something or the speed difference.
  13. T

    Audi A6 4G FL 2016 adjust frame speed and ACC light intensity (leds from 0 to 250 km / h)

    No one can tell me why I get error 31 out of range and I can't change it?
  14. T

    Audi A6 C7 Facelift 2016 SideAssist Retrofit with pre sense rear

    Car is LHD Wednesday,15,September,2021,19:55:13:58101 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 21.9.0.1 (x64) HEX-V2 CB: 0.4555.4 Data version: 20210824 DS330.0 www.Ross-Tech.com Workshop Code: 123 12345 023456 VIN: WAUZZZ4G7GN133678 License...
  15. T

    Audi A6 C7 Facelift 2016 SideAssist Retrofit with pre sense rear

    Hi there. My car is facelit from 2016 audi a6 4g. I have original side assist in the car. You can see my encodings of the modules you say and compare them with yours. If you need anything else ask me.
Back
Top