Badea_Cristian

solved....just coding with same value and then Basic Settings

i check in ETKA and 329A it's the replacement part of 329. I will check with Basic settings then i will post the result here.

Hello everyone, I got a Passat CC in my workshop that has a failure on AFS. Cornering not working as well and it shows afs error in the...

in your scenario i will do a full coding with Odis.

did you try to create an adaptation channel map from the current control modules where everything is working?

That is not correct, Uwe is correct. Front door modules are dataset parameterized because same modules are used in several different...

Last week i replace on a Seat Leon 2021 a door control module and i use the old coding after that datasheet error disappearing Maybe my...

to be honest i didn't uderstand on which driver door you have the issue... start with recoding the rear left door with 150000, it's the...

try to code the rear door control module on Left side using the coding 150000. Then check what is the difference on front on the first...

did you check the values in module 16 as i mention in the post above?

solved by replacing the cluster with and old cluster from 2008 CC part number 3C8920870. I restore parking module as well by restoring...

I figured it out! So tonight after everyone went home I decided to start from scratch, double checked tcm, nope, different cluster...

Check if you mount correctly the steering angle sensor. Put the wheels in the center position and then remove the steering wheel. Now...

From the past experience if it's the engine code with Adblue from 2014 then you issue may be related with Low Pressure EGR. This is...

to be honest i didn't check the channel number but i'm posting here a photo with the name. Installation Park Steer Assist It has 3...