EuroX

Need to calculate coding based on options.

Data source: Vehicle Hardware part number: 1K0907379BJ Part number: 1K0907379BJ Hardware version number: H31 Software version...

Also not for nothing but you had a thread from over a year ago with a full auto scan that had the abs coding in that log so why not just...

If it wasnt purchased at the dealer or a reputable parts vendor the switch and parts are just that... SHIT.

Honestly if the old module had failed. I think your best bet would of been to send the original out for a rebuild. There is a few place...

Let me jump in rub my magical crystal ball and tell you what the issue is or was possibly. Someone tried/attempted or modified the data...

The correct part number of the ABS module that you need and what the vehicle should have is :1K0907375AH. What you have installed is...

He said he swapped over the dash from one to the other vehicle. Most likely the CEL is coded out in the ecm. You can code out individual...

So you'd like us to somehow remotely diagnose this car without seeing a current scan that might show what's going on with it? If you...

MY 2020 MLB-II Audi... Do you have the hood ("bonnet") open when you do that? I'm near certain this car will have a "diagnostic...

UPDATE: finally figured out the problem, steering rack was bad had short in it and it was causing all the faults, COMPLETELY...

I would if I could (unfortunately, your post does not provide a suggestion how to get a scan done with a car 200 miles away, and no...

Noted ill just keep my mouth shut then. Good luck.

I don't know how someone expect help or any sort of remotely accurate diagnosis by posting a scan that's 3 years old. That just boggles...

ECM reflash or TCM/Mech reflash? If either or I suspect bricked module or wrong software written to module. This would be after checking...