Volksnator1792
New Member
I have a 2017 Volkswagen Passat. working on re-wiring the front assist camera. I have wired everything correctly and followed a few other forms of other b7 and b8 Passat. One thing that confuses me is in the manual from those 2 people it says a wire needs to be jumped from the camera to the front assist radar (Pin 5) this is the wiring harness I was told to get. https://www.amazon.com/dp/B07MNSQ9QG/ref=cm_sw_r_oth_api_glt_fabc_6CTCWQYMKVN9C3Y7NHRH
one guide I followed https://www.vwvortex.com/threads/the-quest-for-the-elusive-usa-acc-retrofit.9301529/
also referred to the radar (Pin 5) https://forums.ross-tech.com/index.php?threads/3824/
on the harness I am greeted with a very short green cable with one terminal plug. The same green cable that connects to the radar distance sensor. There is suppose to be 2 but only one. I got everything else down great except that. can someone maybe help me figure this out please? thanks!
one guide I followed https://www.vwvortex.com/threads/the-quest-for-the-elusive-usa-acc-retrofit.9301529/
Resolved - Passat B8 early 2015, Retrofitting A5 front camera + DLA + Lane assist- Finished
The car is factory equipped with front assist (no ACC), led HIGH, park assist etc.. etc. Retrofitted A5 camera is calibrated at dealer and seems to be satisfied, though I can only see some 40km of dynamic calibration there - does this trigger when you actually start to use lane assist and the...
forums.ross-tech.com
on the harness I am greeted with a very short green cable with one terminal plug. The same green cable that connects to the radar distance sensor. There is suppose to be 2 but only one. I got everything else down great except that. can someone maybe help me figure this out please? thanks!