New to forum; Audi Q5 camshaft adjustment values

[angevel]

Hello, I would like to ask for help regarding the VCDS readings on the camshaft adjustments (timing chain) for my Audi Q5 2009 3.2L. I want to see if there is a problem with the timing chain., i.e. whether it needs replacement. The picture below shows the readings, but they are in a different format from typical camshaft readings(channel 91,92,93) that I see in forums and it is a bit difficult for me to interpret the measurements. So I know that deviations above +/- 4 means there is a problem - I can see zeros for intlet/exhaust bank 1 and 2 actual, which looks positive to me. But then I am bit concerned regarding the specified values (-132.00 and 137.750) for intlet/exhaust and the exhaust phase/intlet phase values (-47.250, -46.875, -47.625, -47.250).

Any help will be appreciated.

The auto-scan gives no fault codes.

Thank you!

 

[Uwe]

The auto-scan gives no fault codes.

Please post it anyway for context.

-Uwe-

 

[angevel]

Removed. Data from a clone/pirate copy of VCDS is not welcome here.

 

[Uwe]

Getting help in this forum requires the use of a legitimate VCDS system.

They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php#uk

Let us know if/when you get one and we'll adjust your forum status.

-Uwe-