Hello,
We keep throwing these codes! Only happens when driving for a while (on freeway). We have replaced the throttle body THREE TIMES now, argh. We have replaced the connector plug, spliced in new wires, and new pins. All continuity to ECU and resistance values check out fine. Drives just fine for a few weeks then fails while driving. Letting the engine cool down will allow it to start and run again.
What am I missing? Is the ECU prone to this type of failure (about the only thing I haven't replaced yet).
Thanks,
Kelly
P.S. Log file:
We keep throwing these codes! Only happens when driving for a while (on freeway). We have replaced the throttle body THREE TIMES now, argh. We have replaced the connector plug, spliced in new wires, and new pins. All continuity to ECU and resistance values check out fine. Drives just fine for a few weeks then fails while driving. Letting the engine cool down will allow it to start and run again.
What am I missing? Is the ECU prone to this type of failure (about the only thing I haven't replaced yet).
Thanks,
Kelly
P.S. Log file:
Code:
Address 01: Engine Labels: 022-906-032-BDB.lbl
Control Module Part Number: 022 906 032 HG HW: 022 906 032 GP
Component and/or Version: TT-3.2-DQ-LEV2 G 0862
Software Coding: 0000178
Work Shop Code: WSC 01236 785 00200
VCID: 57FE8EECE6988BF2CC-8002
2 Faults Found:
005445 - Throttle Valve Controller
P1545 - 008 - Malfunction - Intermittent
Freeze Frame:
Fault Status: 00101000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 192463 km
Time Indication: 0
Date: 2019.04.21
Time: 15:53:27
Freeze Frame:
RPM: 2513 /min
Load: 18.4 %
Speed: 101.0 km/h
Temperature: 73.0°C
Temperature: 17.0°C
Absolute Pres.: 850.0 mbar
Voltage: 14.097 V
005464 - Throttle Actuator (G186)
P1558 - 002 - Electrical Malfunction - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 0
Fault Frequency: 1
Reset counter: 255
Mileage: 192464 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Load: 100.0 %
Speed: 0.0 km/h
Temperature: 72.0°C
Temperature: 21.0°C
Absolute Pres.: 850.0 mbar
Voltage: 9.652 V
Readiness: 0010 0100
Last edited by a moderator: