Page 2 of 7 FirstFirst 1234 ... LastLast
Results 11 to 20 of 68

Thread: VW Passat B8 2017 Tweaks

  1. #11
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    78
    Post Thanks / Like
    look at my A5 scan on another post to see if it's of any help. I have lane assist from factory on Mk2 Tiguan

  2. Likes hex.v2.belgium liked this post
  3. #12
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    DE
    Posts
    213
    Post Thanks / Like
    Quote Originally Posted by hex.v2.belgium View Post
    Hi TBAx, will try this weekend to code all the modules...

    For the Front Sensor (A5) beeing a MFK_B_MQB, do you know what the difference is?
    Enabling of Lane Assist should work as follows (writing from memory, so no guarantee):
    • Coding > Byte 16 > enable Bit 3 and 7


    When l look at Dana's scan of a Golf Alltrack here, some Adaptions have to be set:
    • IDE10870-Switch-on condition: lane depart. warn. > on (setting via menu)
    • IDE10871-System mode: lane depart. warn: > Steering wheel vibration not active
    • IDE10872-Warning intensity: lane depart. warning > Medium
    • IDE10407-Personalization of intervention moment at T. 15 on > Last setting


    Remeber to enable adaption via SA displayed in VCDS. The other modules are the same as with other vehicles (Golf 7 etc).


    Quote Originally Posted by golfi_vend View Post
    Does the front camera really limit the speed? I think what limits is the radar 13- Automatic Distance control.
    I guess so. The Passat B8 uses a "midline" ACC sensor (MRRevo) in combination with the Front camera (which therefore has to be a MFK_B_MQB, as far as I understand). The speed limit is somewhere in those two modules I guess. However it's neither coding nor adaption, so might be parameters or even software version.
    Last edited by TBAx; 01-17-2017 at 02:29 PM. Reason: added missing adp channel

  4. Likes welshkaiboy liked this post
  5. #13
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    78
    Post Thanks / Like
    Code:
    ;SW:3Q0-980-654-F   HW:3Q0-980-654 ---  Frt Sens. Drv. Assist
    ;Component:MQB_B_MFK     H06 0220, Coding:0003070600000401000213448040A10094000E000020
    ;EV_MFKBoschMQBB,001001,EV_MFKBoschMQBB.rod
    ;Saturday,31,December,2016,16:47:40:09667
    ;VCDS Version: Release 16.8.4 (x64)  Data version: 20161129 DS267.0
    ;VCID: 3A55E97EBD7A5A92C7-806E
    
    IDE00001-Production mode,Deactivating 
    IDE00820-ENG130919-Activating and deactivating all development messages-Activation_of_development_messages_EHR,not activated 
    IDE00820-ENG130920-Activating and deactivating all development messages-Activation_of_development_messages_HCA_lane,not activated 
    IDE00820-ENG130921-Activating and deactivating all development messages-Activation_of_development_messages_HCA_state,not activated 
    IDE00820-ENG130922-Activating and deactivating all development messages-Activation_of_development_messages_internal,not activated 
    IDE00820-ENG130916-Activating and deactivating all development messages-Activation_of_development_messages_lane,not activated 
    IDE00820-ENG130915-Activating and deactivating all development messages-Activation_of_development_messages_reserved,not activated 
    IDE00820-ENG130918-Activating and deactivating all development messages-Activation_of_development_messages_VZF/TSR,not activated 
    IDE00820-ENG130917-Activating and deactivating all development messages-Activation_of_development_messages_WLA,not activated 
    IDE02332-Deactivate production mode,0 
    IDE04160-Direct. stab. assist speed threshold during towing mode,300 km/h
    IDE04733-Road sign detection fusion mode,Road sign fusion 
    IDE06425-Roller test bench mode: functional,not activated 
    IDE07358-Distance to calibration field,1500 mm
    IDE07596-Personalization of lane dept. warning Cl. 15 on,Last setting 
    IDE09375-IDE05717-Axle offset-Front axle transverse position,1.00001 mm
    IDE09375-IDE05718-Axle offset-Rear axle transverse position,5.96046e-006 mm
    IDE09376-IDE02001-Body height wheel house edge-Body height left front wheel house edge,778 mm
    IDE09376-IDE02002-Body height wheel house edge-Body height right front wheel house edge,772 mm
    IDE09376-IDE02003-Body height wheel house edge-Body height left rear wheel house edge,799 mm
    IDE09376-IDE02004-Body height wheel house edge-Body height right rear wheel house edge,793 mm
    IDE09391-MAS08824-Calibration target position-Target 1: calibration mark 1: x-coordinate,2460 mm
    IDE09391-MAS08825-Calibration target position-Target 1: calibration mark 1: y-coordinate,742 mm
    IDE09391-MAS08826-Calibration target position-Target 1: calibration mark 1: z-coordinate,1697 mm
    IDE09391-MAS08827-Calibration target position-Target 1: calibration mark 2: x-coordinate,2460 mm
    IDE09391-MAS08828-Calibration target position-Target 1: calibration mark 2: y-coordinate,-742 mm
    IDE09391-MAS08829-Calibration target position-Target 1: calibration mark 2: z-coordinate,1697 mm
    IDE09391-MAS08830-Calibration target position-Target 1: calibration mark 3: x-coordinate,2460 mm
    IDE09391-MAS08831-Calibration target position-Target 1: calibration mark 3: y-coordinate,742 mm
    IDE09391-MAS08832-Calibration target position-Target 1: calibration mark 3: z-coordinate,1103 mm
    IDE09391-MAS08833-Calibration target position-Target 1: calibration mark 4: x-coordinate,2460 mm
    IDE09391-MAS08834-Calibration target position-Target 1: calibration mark 4: y-coordinate,-742 mm
    IDE09391-MAS08835-Calibration target position-Target 1: calibration mark 4: z-coordinate,1103 mm
    IDE10407-Personalization of intervention moment at T. 15 on,Last setting 
    IDE10870-Switch-on condition: lane depart. warn.,on (setting via menu) 
    IDE10871-System mode: lane depart. warn:,Steering wheel vibration not active 
    IDE10872-Warning intensity: lane depart. warning,Medium 
    IDE10873-BAP personalization,activated 
    IDE10924-MAS02479-Initial calibration: result-Yaw angle,-0.279 
    IDE10924-MAS05286-Initial calibration: result-Roll angle,-0.142 
    IDE10924-MAS05287-Initial calibration: result-Pitch angle,-0.144 
    IDE10924-MAS10678-Initial calibration: result-Camera height,1475 mm
    ENG130776-ENG130840-Adaptation_tsr-Par_country_code_RSR,0 
    ENG130776-ENG130841-Adaptation_tsr-Par_country_code_VZF,0 
    ENG130776-ENG130838-Adaptation_tsr-Par_country_mode,automatic 
    ENG130776-ENG130839-Adaptation_tsr-Par_relevance_mode,Enabled 
    ENG120319-Mask_error_reactions_for_development,not activated 
    ENG107577-ENG107577-Masked_fault_classes-,255 
    ENG107577-ENG107577-Masked_fault_classes-,255 
    ENG107577-ENG107577-Masked_fault_classes-,255 
    ENG107577-ENG107577-Masked_fault_classes-,255 
    ENG130777-standstill_mode,not activated 
    ENG130781-ENG130836-WLA_adjustment-BrightnessThreshold_active,12.8 
    ENG130781-ENG130837-WLA_adjustment-BrightnessThreshold_passive,0 
    ENG130779-Xcp_interface,not activated

  6. #14
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    Belgium
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by welshkaiboy View Post
    look at my A5 scan on another post to see if it's of any help. I have lane assist from factory on Mk2 Tiguan
    Could you also post a full autoscan of your tiguan, then I can also start comparing the long coding for interesting delta's ;-)

  7. #15
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    78
    Post Thanks / Like

  8. #16
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    DE
    Posts
    213
    Post Thanks / Like
    Can I help? Are you searching for the other changes that have to be made for LDW to work?

  9. #17
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    Belgium
    Posts
    32
    Post Thanks / Like
    Hey,

    looking for some further adaptations (have not yet done the lane assist, on my todo list when I have a full day to implement and test)

    I would like to enable the rear lights in DLR mode as in following video:
    https://www.youtube.com/watch?v=hmn80BHFsi0
    (the part at ~42sec with outer LED rings)

    Any idea what to code?

  10. #18
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    DE
    Posts
    213
    Post Thanks / Like
    Not sure, which lights; should be something in line with Leuchte23 and Leuchte24. Just add the light function Tagfahrlicht/Daylight running lights and you are done. Should be very easy.

  11. Likes hex.v2.belgium liked this post
  12. #19
    Verified VCDS User
    Join Date
    Jan 2017
    Location
    Belgium
    Posts
    32
    Post Thanks / Like
    Quote Originally Posted by TBAx View Post
    Not sure, which lights; should be something in line with Leuchte23 and Leuchte24. Just add the light function Tagfahrlicht/Daylight running lights and you are done. Should be very easy.
    Thanks for the pointer, seems Leuchte23 and Leuchte24 are the outer 'stripes' of the rear lights, not the rings.
    See the youtube vid at ~50sec what I mean with outer stripes.


    After some searching I found that the rear outer rings are enabled through Leuchte16 and Leuchte17
    So added the lightfunction Daylight running lights to lightfunction D16 and D17 and it works! Thanks!

    Cannot EDIT my first post anymore, so adding the changes in this post:

    Rear lights outer LED rings as DRL
    Select Control unit 09 (Central Electrics)
    Security access
    Access Code 31347
    Adaptation
    Leuchte16 - Lightfunction D16 change from non-active to Daylight running lights
    Leuchte17 - Lightfunction D17 change from non-active to Daylight running lights
    Last edited by hex.v2.belgium; 03-14-2017 at 05:28 PM.

  13. Likes Uwe, D-Dub liked this post
  14. #20
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    DE
    Posts
    213
    Post Thanks / Like
    I wasn't sure anyway , but great you still found the correct adaptions!

  15. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •