Autoscan Clear DTC`s not working.

   #1  

Speedparts

Verified VCDS User
Verified
Joined
Apr 8, 2014
Messages
56
Reaction score
17
Location
Greece
VCDS Serial number
C?ID=179205
Hello guys ,

I have some problems with DTC clear lately ,(only NON CAN BUS cars I think) .
I do a full autoscan. See some DTC`s , perform a clear all , it is doing a full autoscan again....nothing is cleared.
This happens a lot lately (I use version beta 14.5.x)

I know that not all dtc`s can be just cleared , but even simple ones just doesn`t clear with autoscan.
When I enter the modules individually I can clear them without any problems.

Tested on both laptops (windows 8.1 64bit and Windows 7 32bit so it is not hardware related) ,also on various VAG Cars. I think it only worked with CAN cars (it shows a window about CAN-clear )

thanks!
 
   #2  

Santos

Administrator
Staff member
Administrator
Joined
Jan 29, 2014
Messages
461
Reaction score
3,103
Location
Lansdale, PA, USA
what interface are you using?

What was the latest car you had issues with?
 
   #3  

Speedparts

Verified VCDS User
Verified
Joined
Apr 8, 2014
Messages
56
Reaction score
17
Location
Greece
VCDS Serial number
C?ID=179205
I am using HEX+CAN . It couldnt clear Audi A4 B6 (x2) ,VW Golf GTI 2003 ,Audi S3 8L 2003 , thats from memory.

Yesterday I autoscaned the Audi S3 for example , a couple of mistakes in ENGINE module (N249 and DV) , the problem did go away the car was ok, clearing from Autoscan , nothing happened , cleared from ENGINE module worked fine and the car is still o.k.


So what I do now is looking at Autoscan and then go individualy thrrough modules for dtc clearing :/
 
   #4  

Santos

Administrator
Staff member
Administrator
Joined
Jan 29, 2014
Messages
461
Reaction score
3,103
Location
Lansdale, PA, USA
I just tested the latest beta 14.5.3 and could not reproduce. It successfully cleared DTCS via autoscan "clear all".

Can you try clearing DTC's with 12.12.2 ?
 
  • Like
Reactions: Uwe
   #5  

Speedparts

Verified VCDS User
Verified
Joined
Apr 8, 2014
Messages
56
Reaction score
17
Location
Greece
VCDS Serial number
C?ID=179205
Hello Santos , I will try to test 12.12.2 on Monday , on a car with no CAN (looks like it is a seperated command with CAN) .
 
Back
Top