Page 10 of 10 FirstFirst ... 8910
Results 91 to 94 of 94

Thread: 2016 A3 - Disable Parking Lights - US Spec?

  1. #91
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    134
    Post Thanks / Like
    Right. It is not possible to do this via coding!

    BCM Pin A59 ----> plate lights
    ....................|
    ....................|
    ....................X----> side markers

    What a beatiful ASCII wiring diagram.

    What you could do is pinning the side markers at an empty BCM Pin. Then you can control it via coding. For this you have to find the connection...
    Last edited by hadez16; 11-15-2017 at 08:47 AM.

  2. #92
    Verified VCDS User
    Join Date
    Feb 2016
    Location
    CT
    Posts
    49
    Post Thanks / Like
    Quote Originally Posted by hadez16 View Post
    Right. It is not possible to do this via coding!

    BCM Pin A59 ----> plate lights
    ....................|
    ....................|
    ....................X----> side markers

    What a beatiful ASCII wiring diagram.

    What you could do is pinning the side markers at an empty BCM Pin. Then you can control it via coding. For this you have to find the connection...
    Yay! Haha... Thanks for confirming. I will most likely open up the headlights this weekend and see if I can't unplug them manually as I think that would be an easier route to take. Will report back!

    What do you think you have to do in your situation to get them on? Maybe the plugs are just dangling and have to be connected

  3. #93
    Verified VCDS User
    Join Date
    May 2014
    Location
    Melbourne, Australia
    Posts
    2,071
    Post Thanks / Like
    Quote Originally Posted by hadez16 View Post
    Your statement would be true if there was a "NOT" at the end. (I put it in...)

    The priority of the "Light function" go from H to A where H > A.
    If Standlicht function in function A is removed, the lights would be still on if light function "beidseitiges Dauerparklicht" is switched on.



    Wow...what a mess.
    So somehwere is a hard-wiring from plate lights to side markers. I gues somewhere near the BCM.
    Haldez: hmm........... not sure that retaining the "beidseitiges Dauerparklicht" command in any way helps AidiSport solve the problem of the lamps being constantly illuminated. With the removal of this command from the Leuchte-set, at least Aidisport's problem is now reduced to the lamps only illuminating when low beams are switched-on. Beyond this, and as I have already suggested COMPLETE disablement of the lamps needs physical disconnections.

    Don
    Last edited by DV52; 11-15-2017 at 10:09 PM.
    VW Golf MkVII (103TSI) my13

  4. Likes Dana liked this post
  5. #94
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    134
    Post Thanks / Like
    Nothing more and nothing else I tried to say

  6. Likes Dana, DV52 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •