Page 13 of 13 FirstFirst ... 3111213
Results 121 to 123 of 123

Thread: Testbench setup?

  1. #121
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    Germany
    Posts
    8
    Post Thanks / Like
    Hello guys,
    I have a neu projekt now and maybe you can help me, it has something to do with ECU #16 and #44,
    normaly an EPS#44 need some external agle signal, it is an normal CAN message from #16,
    I connected EPS#44 to my CanRestBusSimmulation from Audi(it is Audi EPS), but I can not simulate a CanRBS from #16(to complex counter), thats why I always have a "External Agle Fail". then I connect #16(agle sensor) and #44 physically with cable, it was a solution from this problem,BUT now I need one more ECU... Can I hack the ECU#44(EPS) and say :"you do note need external agle anymore, work without it"? Maybe EEPROM programming? Thanks for reading,sorry I saw you write about#16 and maybe you have solution for it.

  2. #122
    Verified VCDS User
    Join Date
    Aug 2016
    Location
    Switzerland
    Posts
    383
    Post Thanks / Like
    i know that some power steering units should be able to work without steering angle sensor, at least in the lower specced cars like a polo.
    then the G85 is somehow integrated into the power steering unit.

    is there some long coding available for your 44 ECU that says anything about steering angle, ESP, etc?

  3. #123
    Verified VCDS User
    Join Date
    Sep 2017
    Location
    Germany
    Posts
    8
    Post Thanks / Like
    nope, nothing about it...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •