Audi Q5 -10 Tail LED

Status
Not open for further replies.
   #1  
T

toni2f

Verified VCDS User
Verified
Joined
Dec 22, 2015
Messages
11
Reaction score
3
Location
Viti, Kosovo
VCDS Serial number
C?ID=248823
hello
I have Audi Q5 3.0TDI 2010

How enable rear tail LED ???
whom byte to change, if u have any photo.
all the best
 
   #2  
Uwe

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
49,279
Reaction score
33,815
Location
USA
VCDS Serial number
HC100001
Please post an Auto-Scan so people can see what modules are installed and how they are configured.

-Uwe-
 
   #3  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,018
Reaction score
9,022
Location
Western PA, USA
After doing so we should move this to the Retrofits sub-forum.

Although we need the scan.. I will also mention B8 chassis Audi models don't use coding for LED Tails in BCM2 (Address 46). Instead, numerous adaptation channels apply to the rear lighting. Providing modifications have not been made yet we can get you the proper Security Access code in addition to instructions for creating an Adaptation function control module map in the factory condition.
 
  • Like
Reactions: Uwe
   #4  
T

toni2f

Verified VCDS User
Verified
Joined
Dec 22, 2015
Messages
11
Reaction score
3
Location
Viti, Kosovo
VCDS Serial number
C?ID=248823
I will post soon, as I get car
 
   #5  
rlarsen

rlarsen

Verified VCDS User
Verified
Joined
May 5, 2015
Messages
316
Reaction score
182
Location
Copenhagen, Denmark
VCDS Serial number
C?ID=78998
Dana said:
After doing so we should move this to the Retrofits sub-forum.

Although we need the scan.. I will also mention B8 chassis Audi models don't use coding for LED Tails in BCM2 (Address 46). Instead, numerous adaptation channels apply to the rear lighting. Providing modifications have not been made yet we can get you the proper Security Access code in addition to instructions for creating an Adaptation function control module map in the factory condition.
Click to expand...
The login code is the same as with the A4/A5 (8K/8T) and A6 (4G), and the Channels too (181 to 212) - but the question is what the codings should be, and how to re-pin the wires.
 
Status
Not open for further replies.
Back
Top