Very long story : here are the cliff notes
Turbo vanes on the drivers side closed off and the truck would not run.
Pulled engine, rebuilt turbos, reinstalled all is well for 5k miles.
Starting to get turbo drop out due to missing messages on the passenger side turbo. Have checked the canbus wires from the turbo to the point in which they join together in the engine harness. Have verified that the ohm drop is minimal, replaced any sonic joints with oem crimps and heat shrink 3m marine tubes.
Worked for about another 1k. Same issue same side. I am trying to get a new module from Europe, I also want to try and re initialize the existing module. Basically make it think we have installed a new one and make it search it out. Can anyone guide me to the process of doing so? Anyone have any better ideas?
Thanks in advance!
Turbo vanes on the drivers side closed off and the truck would not run.
Pulled engine, rebuilt turbos, reinstalled all is well for 5k miles.
Starting to get turbo drop out due to missing messages on the passenger side turbo. Have checked the canbus wires from the turbo to the point in which they join together in the engine harness. Have verified that the ohm drop is minimal, replaced any sonic joints with oem crimps and heat shrink 3m marine tubes.
Worked for about another 1k. Same issue same side. I am trying to get a new module from Europe, I also want to try and re initialize the existing module. Basically make it think we have installed a new one and make it search it out. Can anyone guide me to the process of doing so? Anyone have any better ideas?
Thanks in advance!