1999 Golf PD150 - 18020, 16989, 17932

Status
Not open for further replies.
   #1  

ghetuning

Verified VCDS User
Verified
Joined
Aug 20, 2014
Messages
5
Reaction score
2
Location
UK
VCDS Serial number
C?ID=110913
Good evening peeps.

Here's the autoscan:

Code:
Monday,12,January,2015,11:03:29:16548
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 14.10.0.0 (x64)
Data version: 20141022

Dealer/Shop Name: GHE Tuning

VIN:    License Plate: V965EJT
Mileage: 183570km-114065mi   Repair Order: 


Chassis Type: 1J - VW Golf/Bora IV (1998 > 2006)
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
          76
 
   Mileage: 183570km-114065miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 038-906-019-ARL.lbl
   Part No: 038 906 019 FE
   Component: 1,9l R4 EDC 0000SG  1468  
   Coding: 00002
   Shop #: WSC 13765  
   VCID: 5FC6BD00DD7D38D9361-4ACE

3 Faults Found:
18020 - Engine Control Module Incorrectly Coded 
            P1612 - 35-00 - 
16989 - Internal Control Module 
            P0605 - 35-00 - ROM Error
17932 - Fuel Pump Relay (J17) 
            P1524 - 35-10 - Open or Short to Ground - Intermittent
Readiness: 0 0 X X X 

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1J0-907-37x-ABS.lbl
   Part No: 1J0 907 379 R
   Component: ASR     20 IE CAN  0001  
   Coding: 13404
   Shop #: WSC 00028  
   VCID: 40845E7C40C367212FB-4AE6

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 6Q0-909-605-VW5.lbl
   Part No: 6Q0 909 605 A
   Component: 02 AIRBAG VW5       0003  
   Coding: 12338
   Shop #: WSC 00028  
   VCID: 356A3FA80F01D2898CD-4AE6

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1J0-920-xx0-17.lbl
   Part No: 1J0 920 922 C
   Component: A4-KOMBIINSTR. VDO V22   
   Coding: 05444
   Shop #: WSC 00001  
   VCID: 2648E8E4C2A7A911357-5102

   Subsystem 1 - Part No: IMMO
   Component: IDENTNR: VWZ7Z0X2095207         
   IMMO-IDENTNR: VWZ7Z0X2095207       

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901 
   Component: Gateway K<->CAN    0001  
   Coding: 00006
   Shop #: WSC 00028  
   VCID: 70E4CEBC30E3B7A19FB-5102

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 1J0-959-799.lbl
   Part No: 1J0 959 799 AH
   Component: 4V Zentral-SG Komf. 0001  
   Coding: 00256
   Shop #: WSC 00028  
   VCID: 040C926C145BBB014B3-4AE6

   Subsystem 1 - Part No: 1J2959802C
   Component: 4V Tõrsteuerger. FS0002r  

   Subsystem 2 - Part No: 1J2959801D
   Component: 4V Tõrsteuerger. BF0002r  

No Faults Found
  or DTCs not supported by controller
  or a communication error occurred

End-------------------------(Elapsed Time: 05:38)--------------------------

Just to give you some brief information.

This car started life as a PD115. The turbo failed and took out the engine. The owner has replaced the engine with an ARL and fully rebuilt it. He's also placed a bigger hybrid turbo on, intercooler etc.

He bought a second hand ECU from an online auction website that was plug and play, apparently!

Anyway, he's come to us for some tuning to be done but we only had time to do a full scan and a quick run to check fueling/boost etc. Now after clearing the other codes, these 3 were the only ones left and concern me slightly.

Question is, is it just the coding that needs sorting or is there an underlying fault with the plug & play ECU he's bought?

Any help/guidance will be much appreciated.

Thanks ahead.
 
Last edited by a moderator:
   #2  

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,018
Reaction score
9,023
Location
Western PA, USA
The Internal Control Module: ROM Error DTC looks scary but I would try to code it. Do you have a scan from the original controller so we can compare the new and original part numbers and coding?
 
  • Like
Reactions: Uwe
   #3  

ghetuning

Verified VCDS User
Verified
Joined
Aug 20, 2014
Messages
5
Reaction score
2
Location
UK
VCDS Serial number
C?ID=110913
The Internal Control Module: ROM Error DTC looks scary but I would try to code it. Do you have a scan from the original controller so we can compare the new and original part numbers and coding?

Hi Dana,

No I don't but do have the original ECU from the car in the office, he gave it to me to check out the mapping that was on there.

I'll get the info from it tomorrow when I have 30 minutes.
 
Status
Not open for further replies.
Back
Top