Results 1 to 3 of 3

Thread: Can I go with used parts? Maybe....

  1. #1
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Posts
    1,281
    Post Thanks / Like

    Can I go with used parts? Maybe....

    Since we see this a lot, figured I'd point this out....

    Can you go with a used control module (or other part)? In most cases yes. Right off the bat, used airbag parts, no, no and no. We will not help with anything involving used airbag parts. Now that we got that out of the way....

    Going with used control modules and other parts is fine and dandy in many cases, but the common mistake people make all the time is they get the wrong part number. Parts that are installed at the factory tend to be specific to an application.

    Say for example you are working on a 2003 A4 and the ABS module is failing, maybe flagging codes for bad wheel speed sensors even though the sensors and wiring are to factory design (then can happen). VCDS shows the ABS VAG number as 8E0-614-517-G and your soft coding is 04499. You call up your local junk yard and they have good used ABS module from a 2003 A4, part number 8E0-614-517-H. You install it and when you go to do the coding/login, things just don't work.

    A lot of people make the mistake of thinking that 8E0-614-517-G and 8E0-614-517-H are going to be the same thing. In this example, the "G" version is for Front Wheel Drive vehicles and the "H" version was for Quattro 4 and 6 cylinder vehicles. You must use the correct type of ABS module, you can not mix and match these things. There is even a 3rd version of an ABS module for the "2003 A4" big rollers with V8 engines.

    Be it the ABS, ECM, a throttle body, cylinder head, front bumper cover, ect, same concept applies.

    So again, used parts are fine in most cases, but if the part numbers don't match:



    Two Foot notes, in many cases when you get a new part from the dealer, it will be some sort of updated version and most likely will be a different part number. And there many cases where one might be able to start to mix and match different types of part numbers, but we (Ross-Tech) do not feel obligated to keep track of everything that is interchangeable.
    Last edited by Jef; 08-12-2015 at 05:13 PM.
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    15,269
    Post Thanks / Like
    Blog Entries
    1
    Moved from Car Repair Support to How To's and Tips...

    I'd like to add that in some cases, even getting what appears to the identical part number is not good enough, you have to get the same "Index" or "Color Code" as well. This is nearly common in Airbag modules, and also very common when it comes to Central Convenience Modules.

    -Uwe-

  3. Likes Jack@European_Parts, Jetta ,97 liked this post
  4. #3
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    9,598
    Post Thanks / Like
    In many cases even parts purchased at the dealer counter, are not updated or containing the most recent version.

    You should always reference what your firmware was and now is with new parts using VCDS. Used, new, or crossing.

    Then ultimately the controller should be checked in the repair information, SVM, and TSB/service actions.......... for most recent firmware available.

    A trip to service maybe needed or the proper independent repair service center.

    This is why auto-scan's are of the utmost importance to keep on your customers cars archived.

  5. Likes bawareca, Eric, Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •