Hello Everyone.
I have a 2000 eurovan with an AES engine.
I am trying to get the readiness status to complete. Seven of the eight have passed, but the Evap Emissions part has not passed yet.
What I would like to know is:
1. Does the readiness testing occur in sequential order? If the first does not finish, do the other tests not happen until their turn?
2. What are the specific measuring block numbers correspond to?
I have a readiness code chart to follow for this purpose (chapter three of VW readiness code chart-engine code AES; 1998-99 eurovan 2.8L VR6.
On test #6 Evap Systen diagnosis test, it says to go to block 04/153. Channel 1 (60'C - 95'C) good, Channel 2 (5'C - 94"C) good, Channel 3 (10.1 or 19.1 s) I get .53 s, what does this correlate to?
The other subsequent tests do not show the correct readiness codes either. Is this due to the first not passing?
Please let me know your thoughts, and where I can find out the specific block designations.
Thanks.
Kenny
I have a 2000 eurovan with an AES engine.
I am trying to get the readiness status to complete. Seven of the eight have passed, but the Evap Emissions part has not passed yet.
What I would like to know is:
1. Does the readiness testing occur in sequential order? If the first does not finish, do the other tests not happen until their turn?
2. What are the specific measuring block numbers correspond to?
I have a readiness code chart to follow for this purpose (chapter three of VW readiness code chart-engine code AES; 1998-99 eurovan 2.8L VR6.
On test #6 Evap Systen diagnosis test, it says to go to block 04/153. Channel 1 (60'C - 95'C) good, Channel 2 (5'C - 94"C) good, Channel 3 (10.1 or 19.1 s) I get .53 s, what does this correlate to?
The other subsequent tests do not show the correct readiness codes either. Is this due to the first not passing?
Please let me know your thoughts, and where I can find out the specific block designations.
Thanks.
Kenny