Tinerfe30
New Member
Hello.
I need up the Idle speed specified value, now is 780 rpm.
Spark plugs, air filters and gasoline have changed. The car works properly, but when it is at 780 rpm it makes a small vibration, if it goes up to 850 rpm approximately that vibration disappears.
In adaptation, the option to adjust the Idle speed Value does not appear.
Any help is well come
I need up the Idle speed specified value, now is 780 rpm.
Spark plugs, air filters and gasoline have changed. The car works properly, but when it is at 780 rpm it makes a small vibration, if it goes up to 850 rpm approximately that vibration disappears.
In adaptation, the option to adjust the Idle speed Value does not appear.
Any help is well come
Code:
Thursday,08,March,2018,14:45:38:40665
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 18.2.0.3
Data version: 20180212 DS287.0
www.Ross-Tech.com
Dealer/Shop Name: No name
Workshop Code: 222 12345 054321
VIN: WVWZZZ6RZFY048968 License Plate:
Chassis Type: 6R-VW26 (6C0)
Scan: 01 03 08 09 15 17 19 44
VIN: WVWZZZ6RZFY048968 Mileage: 82498km-51261miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CHYB) Labels:. 04C-906-020-CHY.clb
Part No SW: 04C 906 057 A HW: 04C 907 309 J
Component: R3 1.0l MPI H22 7750
Revision: 31H22000
Coding: 01110012020408080000
Shop #: WSC 00788 648 00255
ASAM Dataset: EV_ECM10MPI01104C906057A 001011
ROD: EV_ECM10MPI01104C906057A.rod
VCID: 234069F22A4B215C25-8076
No fault code found.
Readiness: 0000 0001
Last edited by a moderator:
