Results 1 to 7 of 7

Thread: Needle sweep HELP!

  1. #1
    Verified VCDS User
    Join Date
    Dec 2017
    Location
    UK
    Posts
    1
    Post Thanks / Like

    Needle sweep HELP!

    hi
    i was tried to coding Audi a8 2009 to activate the needle sweep, but I don't have long coding on this.
    there is any way to coding that in a decimal way.?
    you can see the URL
    thanks




    file:///C:/Users/katy%20emi/Downloads/20180214_162939.webp
    file:///C:/Users/katy%20emi/Downloads/20180214_164048.webp

  2. #2
    Verified VCDS User PetrolDave's Avatar
    Join Date
    Dec 2014
    Location
    South Molton, UK
    Posts
    1,222
    Post Thanks / Like
    Quote Originally Posted by circiu emil View Post
    you can see the URL

    file:///C:/Users/katy%20emi/Downloads/20180214_162939.webp
    file:///C:/Users/katy%20emi/Downloads/20180214_164048.webp
    Those URLs are to files on your LOCAL hard drive - so nobody else will be able to access them!!!

    What you need to post is a full Auto-Scan - copy the .txt file that VCDS saves and post it inline between CODE tags.

  3. Likes Uwe liked this post
  4. #3
    Verified VCDS User rlarsen's Avatar
    Join Date
    May 2015
    Location
    Copenhagen, Denmark
    Posts
    246
    Post Thanks / Like
    Which coding has you tried with ??
    Rene Larsen

    Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
    VCDS 18.2.0
    (HEX-V2)

  5. #4
    Verified VCDS User
    Join Date
    May 2014
    Location
    Northern Ireland
    Posts
    55
    Post Thanks / Like
    Quote Originally Posted by circiu emil View Post
    hi
    i was tried to coding Audi a8 2009 to activate the needle sweep, but I don't have long coding on this.
    there is any way to coding that in a decimal way.?
    you can see the URL
    thanks




    file:///C:/Users/katy%20emi/Downloads/20180214_162939.webp
    file:///C:/Users/katy%20emi/Downloads/20180214_164048.webp
    Not supported on that model.

  6. #5
    Verified VCDS User Gremling's Avatar
    Join Date
    Dec 2017
    Location
    Norway, Nordland
    Posts
    25
    Post Thanks / Like
    Hi, just out of curiosity. What have you tried?

    have you tried this?

    Enabling Needle Sweep:

    [17 - Instruments]
    [Coding - 07] -> Long Coding Helper -> Select Byte 1
    In Bit 0 - Check box for "Gauge Test/Needle Sweep active"

    Would be nice if you can tell if this did the trick.

    Also remember taking notes/screenshoots of any before and after changes

    Regards
    Gremling

  7. #6
    Verified VCDS User
    Join Date
    Jan 2018
    Location
    Europe
    Posts
    18
    Post Thanks / Like
    OR

    Instruments ----> Adaptation
    Select "indicator_celebration" from the drop down list
    Select "Active" from the lower drop down list

  8. #7
    Professional User Jetta ,97's Avatar
    Join Date
    Apr 2014
    Location
    Dallas (McKinney) ,TX ,USA
    Posts
    633
    Post Thanks / Like
    I would say this model will be in Adaptation like mention above .
    Master Technician for German cars
    Immobilizer/ECU
    /Cluster Programing (Used or NEW) and Key Programing
    Mk6 COLOR cluster in Mk5 -CLIK

    email : marinmm2001@gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •